KEYWORD INDEX as of April 2018

ASABE Notation: The letters S, EP, and D designate the document classification of Standard, Engineering Practice, and Data. The base 3-digit number has no significance. The digits following the decimal identify a specific technical revision of the original document. The month-year designation represents the most recent action, adoption or revision, on the document. Parentheses following the month-year indicate the year the document was last reaffirmed.

D271.2 APR1979 (R2014)D = data271 = base number; .2 = second revisionAPR1979 = adoption or last revision;   R2014) = last reaffirmation

ISO Adaptions: ASABE ISO adoptions are designated by AD (Adoption with deviations) or ISO (identical adoption).The base number is the ISO document number.The 4-digit number following the ISO number is the year the document was approved by ISO. The month-year designation represents the most recent ASABE adoption or revision of the document.Parentheses following the month-year indicate the year the document was reaffirmed.

ASAE/ISO 9191:1990 OCT2001 (R2017)ISO = identical adoption9191 = ISO document adopted

1990 = version of ISO adoptedOCT2001 = adoption or last revision

(R2017) = last reaffirmaiton

NOTE: ASABE Standards, Engineering Practices, and Data are informational and advisory only. Their use by anyone engaged in industry or trade is entirely voluntary.

The ASABE assumes no responsibility for results attributable to the application of these ASABE Standards, Engineering Practices, and Data. Conformity does not ensure compliance with applicable ordinances, laws and regulations. Prospective users are responsible for protecting themselves against liability for infringement of patents.


A

Access and exit — dimensions, Agricultural tractors — operator's workplace - ISO 4252:2007 MAY2012 (R2017)

(Accuracy) Tractors and machinery for agriculture and forestry — test procedures for positioning and guidance systems in agriculture — part 2:testing of satellite-based auto-guidance systems during straight and level travel - ISO 12188-2:2012 OCT2015

Aerial application equipment, calibration and distribution pattern testing of agricultural - S386.2 FEB1988 (R2013)

(Aerial application) Terminology and definitions for application of crop or forestry production and protection agents - S327.4 JUL2012 (R2016)

Agricultural equipment, Headlamps for - S608 AUG2008 (R2017)

(Agricultural loaders) Procedure for determining recommended ballast and minimum rear wheel tread settings for agricultural tractors with agricultural front loaders - EP562.1 SEP2015

(Agicultural loaders) Safety for agricultural front end loaders - S583.1 AUG2015

(Air assist spraying) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2013)

(Air-exchange-rate) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

Air quality, Unifrom terminology for – S588.1 NOV2016

Air quality systems for cabs-terminology and overview, Tractors and self-propelled machinery for agriculture - S613-1 FEB2009 (R2013)

Air quality systems for cabs—part 2: cab & HVAC design, Tractors and self-propelled machinery for agriculture - S613-2.1 JUN2013

Air quality systems for cabs—part 3: filters for environmental cab HVAC systems, Tractors and self-propelled machinery for agriculture - S613-3 JUN2013

Air quality systems for cabs—part 4: performance test of a cab, Tractors and self-propelled machinery for agriculture - S613-4 AUG2017

(Aircraft) Calibration and distribution pattern testing of agricultural aerial application equipment - S386.2 FEB1988 (R2013)

Airflow of grains, seeds, other agricultural products, and perforated metal sheets, Resistance to - D272.3 MAR1996 (R2016)

Alarm systems utilized in agricultural structures, Specifications for - S417.1 MAR1985 (R2018)

Alternative fuels derived from plant oils and animal fats, Reporting of fuel properties when testing diesel engines with - EP552.2 MAY2017

Anaerobic lagoons for animal waste management, Design of - EP403.4 FEB2011 (R2015)

Anchorage location requirements, Tractors and machinery for agriculture — seat belts — part 1: - ISO 3776-1:2006 MAY2012 (R2016)

Anchorage strength requirements, Tractors and machinery for agriculture — seat belts — part 2: - ISO 3776-2:2013 FEB2016

(Anchorage) Tractors and machinery for agriculture—seat belts—part 3: requirements for assemblies – ISO 3776-3:2009 OCT2015

Anhydrous ammonia application equipment, Safety for – S620 MAR2017

Animal bone, Shear and three-point bending test of - S459 MAR1992 (R2017)

Animal-drawn equipment, Lighting and marking of - EP576.2 OCT2012 (R2017)

Application of crop or forestry production and protection agents, Terminology and definitions for - S327.4 JUL2012 (R2016)

Application equipment, Calibration and distribution pattern testing of agricultural aerial - S386.2 FEB1988 (R2013)

(Application equipment) Agricultural machinery — safety — part 6: sprayers and liquid fertilizer distributors – AD4254-6:2009 AUG2013 (R2017)

Applicators, Procedure for calibrating granular - EP371.2 MAR2002 (R2016)

(Applicators) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2013)

(Applicators) Safety for anhydrous ammonia application equipment – S620 MAR2017

(Arid areas) Design, construction, and maintenance of subsurface drains in arid and semiarid areas - EP463.2 NOV2009 (R2014)

(Atmospheric stability) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2013)

(Attachment locking device) Safety for agricultural front end loaders - S583.1 AUG2015

(Attachments) Safety for agricultural front end loaders - S583.1 AUG2015

(Audit) Landscape irrigation system uniformity and application rate testing – S626 SEP2016

Audits, Performing on-farm energy - S612 JUL2009 (R2015)

Auger conveying equipment, Safety for portable agricultural - S361.3 APR1990 (R2015)

Auger conveying equipment, Terminology and specification definitions for agricultural - S374 MAR1975 (R2015)

Auger flighting design considerations - EP389.2 JUN1993 (R2015)

(Auger) Safety for tractor-mounted, boom-type post hole diggers – S619 DEC2013

Auto-guidance systems during straight and level travel, Tractors and machinery for agriculture and forestry — test procedures for positioning and guidance systems in agriculture — part 2:testing of satellite-based – ISO12188-2:2012 OCT2015

Automatic milking installations - requirements and testing - AD20966:2007 MAR2016

B

(Backflow) Safety devices for chemigation - EP409.1 MAR1989 (R2013)

(Bale chopper) Safety for farmstead equipment - S354.6 NOV2016

(Baler) Agricultural machinery – safety – part 11:pick-up balers – AD4254-11 JAN2012 (R2017)

Balers, Baling wire for automatic - S229.6 DEC1976 (R2017)

Balers, Twine for automatic - S315.4 DEC2011 (R2017)

Baling wire for automatic balers - S229.6 DEC1976 (R2017)

Ballast and minimum rear wheel tread settings for agricultural tractors with agricultural front loaders, Procedure for determining recommended - EP562.1 SEP2015

(Ballast) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

(Barn cleaners) Safety for farmstead equipment - S354.6 NOV2016

Basins, Water and sediment control – S442.2 FEB2017

Baskets, Capacity ratings and unloading dimensions for cotton harvester - S375.2 DEC1996 (R2013)

(Beams) Design requirements and bending properties for mechanically laminated wood assemblies - EP559.1 W/Corr. 1 AUG2010 (R2014)

Belt and v-ribbed belt drives for agricultural machines,V- - S211.7 JUL2017

(Best management practice) Framework for evaluating the sustainability of agriculural production systems - S629 JUN2016

Bins, Agricultural pallet - S337.1 FEB1987 (R2017)

(Bins) Flow of grain and seeds through orifices - D274.1 JAN1992 (R2017)

(Bins) Ladders, cages, walkways and stairs - S412.1 MAR1990 (R2014)

Bins, Loads exerted by free-flowing grain on - EP433 DEC1988 (R2015) W/Corr. 1

Bins, Procedure for establishing volumetric capacities of cylindrical grain - EP413.2 FEB2010 (R2014)

(Biobased) Terminology and definitions for biomass prodution, harvesting and collection, storage, processing, conversion and utilization - S593.1 JAN2011 (R2015)

(Bioenergy) Terminology and definitions for biomass production, harvesting and collection, storage, processing, conversion and utilization - S593.1 JAN2011 (R2015)

(Biofuels) Terminology and definitions for biomass production, harvesting and collection, storage, processing, conversion and utilization - S593.1 JAN2011 (R2015)

(Biomass) Net wrap for round balers – S532 APR2014

Biomass production, harvesting and collection, storage, processing, conversion and utilization, Terminology and definitions for - S593.1 JAN2011 (R2015)

(Biopower) Terminology and definitions for biomass production, harvesting and collection, storage, processing, conversion and utilization - S593.1 JAN2011 (R2015)

(Biosecurity) Animal mortality composting – EP585 DEC2015

(Biotech) Procedure for sampling, measuring and reporting commingled crop in combine harvest of a subsequent crop - S598 JAN2010 (R2014)

Blade ductility test, Rotary mower - S483.2 AUG2011 (R2016)

Blanchability, Method of determining peanut - S521 DEC1991 (R2016)

Blower pipe dimensions, Flanged steel - S347.1 MAR1981 (R2015)

Blowers, Dimensions for compatible operation of forage harvesters, forage transporters and forage – S328.3 JUL2003 (R2015)

Bone, Shear and three-point bending test of animal - S459 MAR1992 (R2017)

(Box) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

(Box) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

Brackets and socket for warning lamp and slow-moving vehicle (SMV) identification emblem, Mounting - S277.2 FEB1972 (R2017)

(Brakes) Braking system test procedures and braking performance criteria for agricultural field equipment - S365.9 NOV2011 (R2017)

(Braking) Safety for agricultural field equipment - S318.18 JUN2017

Braking system test procedures and braking performance criteria for agricultural field equipment - S365.9 NOV2011 (R2017)

(Break-away couplers) Safety for anhydrous ammonia application equipment– S620 MAR2017

(Briquettes) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

Brooding equipment, Installation of electric infrared - EP258.5 JUN2014

(Bubbler) Landscape irrigation sprinkler and emitter standard – ASABE/ICC 802-2014

Buildings, Diaphragm design of metal-clad, wood-frame rectangular - EP484.3 DEC2017

(Buildings) Floor and suspended loads on agricultural structures due to use - EP378.4 JUN2010 (R2014)

Buildings, Guidelines for use of thermal insulation in agricultural - S401.2 FEB1993 (R2017)

Bunker (horizontal) silos, Design loads for - EP538.2 OCT2008 (R2013)

C

Cabs-cerminology and overview, Tractors and self-propelled machinery for agriculture-air quality systems for - S613-1 FEB2009 (R2013)

Cabs—part 2: cab & HVAC design, Tractors and self-propelled machinery for agriculture—air quality systems for - S613-2.1 JUN2013

Cabs—part 3: filters for environmental cab HVAC systems, Tractors and self-propelled machinery for agriculture—air quality systems for - S613-3 JUN2013

Cabs—part 4: performance test of a cab, Tractors and self-propelled machinery for agriculture—air quality systems for - S613-4 AUG2017

Cages, walkways and stairs, Ladders - S412.1 MAR1990 (R2014)

Calibrating granular applicators, Procedure for - EP371.2 MAR2002 (R2016)

(Calibration) Yield monitor performance test standard - S578 JAN2007 (R2016)

Calibration and distribution pattern testing of agricultural aerial application equipment - S386.2 FEB1988 (R2013)

Calibration procedures, Guide for preparing field sprayer - EP367.2 MAR1991 (R2017)

Canal linings, Concrete slip-form - S289.2 FEB1998 (R2013)

Capacities of cylindrical grain bins, Procedure for establishing volumetric - EP413.2 FEB2010 (R2014)

Capacities, Tower silos: unit weight of silage and silo - D252.1 MAR1982 (R2014)

Capacity and performance test procedure, Combine - S396.3 JUN2016

Capacity designation for fertilizer and pesticide hoppers and containers - S281.3 APR1987 (R2013)

Capacity and unloading device performance, Equipment for harvesting—combine harvesters—determination and designation of grain tank - AD5687:1999 JAN2014

Capacity of box type manure spreaders—dual rating method, Volumetric - S324.1 APR1986 (R2012)

Capacity of closed tank type manure spreaders, Volumetric - S326.1 JAN1989 (R2014)

Capacity of forage wagons, wagon boxes, and forage handling adaptations of manure spreaders, Volumetric - S238.1 APR1986 (R2015)

Capacity ratings and unloading dimensions for cotton harvester baskets - S375.2 DEC1996 (R2013)

(Capacity) Test procedure and performance criteria for the under-carriage load carrying ability of farm materials transport equipment - S360.1 FEB2004 (R2014)

(Carbon dioxide) Shelled corn storage time for 0.5% dry matter loss - D535 MAY2005 (R2014)

(Carcass) Animal mortality composting – EP585 DEC2015

(Catch can test) Landscape irrigation system uniformity and application rate testing – S626 SEP2016

Chain for towed equipment, Field equipment for agriculture—safety - S338.5 MAY2006 (R2016)

(Channel) Diversions - EP492.1 APR2014

Channels, Agricultural drainage outlets—open - EP407.2 SEP2014

(Chemical) Terminology and definitions for application of crop or forestry production and protection agents - S327.4 JUL2012 (R2016)

(Chemicals) Calibration and distribution pattern testing of agricultural aerial application equipment - S386.2 FEB1988 (R2013)

(Chemicals) Safety devices for chemigation - EP409.1 MAR1989 (R2013)

(Chemicals) Spray nozzle classification by droplet spectra - S572.1 MAR2009 (R2017)

(Chemical treatment) Solid biofuels – fuel specification and classes – part 4: graded wood chips - AD17225-4 FEB2018

(Chemigation) Design and installation of microirrigation systems - EP405.1 APR1988 (R2014)

Chemigation, Safety devices for - EP409.1 MAR1989 (R2013)

Chisel plows, field cultivators, row crop cultivators, ripper shanks and ground tool mountings - S225.2 AUG2016

(Clean) Procedure for sampling, measuring and reporting commingled crop in combine harvest of a subsequent crop - S598 JAN2010 (R2014)

(Clearance) Agricultural tractors — operator's workplace, access and exit — dimensions - ISO 4252:2007 MAY2012 (R2017)

(Clearance) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Clearance) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

(Clearance PTO dirve line) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 2: specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments – AD5673-2:2005 SEP2014

Clearance zone, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 1: general specifications, safety requirements, dimensions for master shield and - AD500-1:2014 FEB2015

Clearance zone, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 2: narrow-track tractors, dimensions for master shield and – AD500-2:2004 OCT2016

(Clearance zone) Agricultural vehicles - mechanical connections between towed and towing vehicles—Part 3: tractor drawbar - AD6489-3:2004 JUL2017

(Clearance zone) Agricultural wheeled tractors – front-mounted equipment – part 1: power take-off and three-point linkage - AD8759-1:1998 JAN2013

(Clearance zone) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 2: specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments – AD5673-2:2005 SEP2014

(Clutch) Power take-off definitions and terminology for agricultural tractors - S205.2 DEC1978 (R2013)

Collapsible emitting hose (drip tape)—specifications and performance - S553 DEC2000 (R2017)

Color code for educational and training laboratories, Safety - EP415.2 NOV1997 (R2012)

(Columns) Design requirements and bending properties for mechanically laminated wood assemblies - EP559.1 W/Corr. 1 AUG2010 (R2014)

Combine capacity and performance test procedure - S396.3 JUN2016

Combine harvesters—determination and designation of grain tank capacity and unloading device performance, Equipment for harvesting - AD5687:1999 JAN2014

(Combine) Procedure for sampling, measuring and reporting commingled crop in combine harvest of a subsequent crop - S598 JAN2010 (R2014)

Combines and grain harvesting, Terminology for - S343.4 JUN2015

(Commercial application) Solid biofuels – fuel specification and classes – part 4: graded wood chips - AD17225-4 FEB2018

Commingled crop in combine harvest of a subsequent crop, Procedure for sampling, measuring and reporting - S598 JAN2010 (R2014)

(Communication) Hand signals for use in agriculture - S351 FEB1972 (R2017)

(Compaction) Soil cone penetrometer - S313.3 FEB1999ED (R2013)

(Compaction) Procedures for using and reporting data obtained with the soil cone penetrometer - EP542 FEB1999 (R2013)

(Compost) Animal mortality composting – EP585 DEC2015

Compression test of food materials of convex shape - S368.4 DEC2000 (R2017)

Concrete irrigation pipe systems, Design and installation of nonreinforced - S261.7 FEB1989 (R2015)

Concrete slip-form canal linings - S289.2 FEB1998 (R2013)

(Confined space) Manure storage safety - EP470.1 OCT2011 (R2016)

(Container) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

Containers from pesticides and pesticide-related products, Recycling plastic - S596 FEB2006 (R2015ED)

(Contamination) Solid biofuels – fuel specification and classes – part 4: graded wood chips - AD17225-4 FEB2018

Control devices to lawn and garden ride-on tractor attachments and implements, Application of remote linear - S377 DEC1974 (R2015)

Controlled Drainage systems in humid regions, Operation of - EP479.1 DEC2013

Controller, Test procedure for measuring the output characteristics of an electric fence - S500 MAR1990 (R2014)

Controls and displays on agricultural equipment, Graphic symbols for operator - S304.8 MAY2006 (R2015)

Controls and other displays-part 1: common symbols, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment-symbols for operator - ISO 3767-1:2016 APR2017

Controls and other displays–part 2: symbols for agricultural tractors and machinery, Tractors, machinery for agriculture and forestry, powered lawn and garden equipmnet – symbols for operator - ISO 3767-2:2016 APR2017

Controls - actuating forces, displacement, location and method of operation, Tractors and self-propelled machinery for agriculture – operator - ISO 15077:2008 OCT2008 (R2013)

(Controls) Safety for agricultural field equipment - S318.18 JUN2017

(Controls) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Controls) Safety for anhydrous ammonia application equipment – S620 MAR2017

(Controls) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

(Conversion factors) Use of SI (metric) units - EP285.8 FEB2014

Conveying equipment, Safety for portable agricultural auger - S361.3 APR1990 (R2015)

Conveying equipment, Terminology and specification definitions for agricultural auger - S374 MAR1975 (R2015)

(Conveyor) Pallet load transfer system for vegetable harvesters, shuttle vehicles, and road trucks - S515 JAN1993 (R2017)

(Conveyors) Auger flighting design considerations - EP389.2 JUN1993 (R2015)

Corn storage time for 0.5% dry matter loss, Shelled - D535 MAY2005 (R2014)

(Costs) Agricultural machinery management - EP496.3 FEB2006 (R2015) Cor.1

(Costs) Agricultural machinery management data - D497.7 MAR2011 (R2015)

(Costs) Performing on-farm energy audits - S612 JUL2009 (R2015)

Cotton drying systems, Temperature sensor locations for seed - S530.1 AUG2007 (R2017)

Cotton Gins - method of utilizing emission factors in determining emission parameters - S582 MAR2005 (R2016)

Cotton harvester baskets, Capacity ratings and unloading dimensions for - S375.2 DEC1996 (R2013)

Cotton module builder and transporter standard - S392.2 APR2005 (R2014)

Cotton module cover material performance – S615.1 DEC2013

Coupler, Agricultural wheeled tractors and implements—three-point hitch coupler—part 1: u-frame - AD11001-1:2016 NOV2016

Couplers for lawn and garden tractors, Dimensions for cylindrical hydraulic - S418.1 OCT2010 (R2014)

Couplers, agricultural tractors and machinery-general purpose quickaction hydraulic – AD5675:2008 JUN2016

Crops, Thin-layer drying of agricultural - S448.2 SEP2014 (R2018ED)

(Crumbles) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

(Cubes) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

Cultivators, ripper shanks and ground tool mountings, Chisel plows, field cultivators, row crop - S225.2 AUG2016

(Curing) Energy efficiency of peanut drying systems – S488.1 APR2013 (R2017)

D

Dairy housing, freestalls, feed bunks, and feeding fences, Terminology and recommendations for freestall - EP444.1 DEC1999 (R2016)

(Dairy) Automatic milking installations-requirements and testing - AD20966:2007 MAR2016

(Dairy) Milking machine installations—construction and performance - AD 5707:2007 MAR2016

(Dairy) Milking machine installations-mechanical tests, - AD6690:2007 JAN2011 (R2015ED)

(Dairy) Milking machine installations—vocabulary - AD3918:2007 JAN2011 (R2016ED)

(Decals) Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – safety signs and hazard pictorials – general principles - AD11684:1995 APR2011 (R2016ED) Cor. 1

Definitions for biomass production, harvesting and collection, storage, processing, conversion and utilization, Terminology and - S593.1 JAN2011 (R2015)

Definitions and methods, Densified products for bulk handling - S269.5 OCT2012 (R2016)

Definitions and terminology for agricultural tractors, Power take-off - S205.2 DEC1978 (R2013)

(Definitions) Braking system test procedures and braking performance criteria for agricultural field equipment - S365.9 NOV2011 (R2017)

(Definitions) Lawn and garden ride on (riding) tractors—three-point hitch - ISO 9191:1991 OCT2001 (R2017)

(Definitions) Construction and rating of equipment for drying farm crops - S248.3 MAR1976 (R2015ED)

(Definitions) Design and installation of microirrigation systems - EP405.1 APR1988 (R2014)

(Definitions) Design and installation of nonreinforced concrete irrigation pipe systems - S261.7 FEB1989 (R2015)

Definitions for agricultural auger conveying equipment, Terminology and specification - S374 MAR1975 (R2015)

Definitions for agricultural tillage implements, Terminology and - S414.2 MAR2009 (R2013)

Definitions for soil tillage and soil-tool relationships, Terminology and - EP291.3 FEB2005 (R2013)

(Definitions) Guidelines for measuring and reporting environmental parameters for plant experiments in growth chambers - EP411.5 DEC2012 (R2016)

(Definitions) Guidelines for selection of energy efficient agricultural ventilation fans - EP566.2 JUN2012 (R2016)

(Definitions) Installation and maintenance of farm standby electric power - EP364.4 FEB2013 (R2018)

(Definitions) Lawn and garden ride on (riding) tractors—one point tubular sleeve hitch - ISO 9192:1991 OCT2001 (R2017)

(Definitions) Tractors and machinery for agriculture and forestry — basic types — vocabulary - S390.6 (ISO 12934:2013) DEC2016

(Definitions) Operating requirements for tractors and power take-off driven implements - S207.13 MAY2015

(Definitions) Recycling plastic containers from pesticides and pesticide-related products - S596 FEB2006 (R2015ED)

(Definitions) Rollover protective structures (ROPS) for wheeled agricultural tractors - SAE J1194 NOV2016

(Definitions) Safety for agricultural field equipment - S318.18 JUN2017

(Definitions) Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment - S604.1 SEP2014

(Definitions) Soil and water terminology - S526.4 SEP2015

(Definitions) Temperature sensor locations for seed-cotton drying systems - S530.1 AUG2007 (R2017)

(Definitions) Uniform terminology for agricultural machinery management - S495.1 NOV2005 (R2015)

(Definitions) Uniform terminology for rural waste management - S292.5 OCT1994 (R2013)

(Definitions) Wiring and equipment for electrically driven or controlled irrigation machines - S362.2 JAN1983ED (R2014)

(Definitions) Agricultural machinery — safety — part 13: large rotary mowers - AD4254-13:2012 OCT2012 (R2017)

(Definitions) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements – AD5673-1:2005 SEP2017

Definitions for planters, drills and seeders, Terminology and - S506 OCT2010 (R2014)

Density, durability, and moisture content, Cubes, pellets, and crumbles—definitions and methods for determining - S269.4 DEC1991 (R2007)

Design loads for bunker (horizontal) silos - EP538.2 OCT2008 (R2013)

Design of anaerobic lagoons for animal waste management - EP403.4 FEB2011 (R2015)

(Design) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

(Deterioration) Shelled corn storage time for 0.5% dry matter loss - D535 MAY2005 (R2014)

Diaphragms, Load tests for metal-clad wood-frame - EP558.1 FEB2014

Dielectric properties of grain and seed - D293.4 JAN2012 (R2016)

Diesel engines with alternative fuels derived from plant oil and animal fats, Reporting of fuel properties when testing - EP552.2 MAY2017

Dimensions of ball-type coupling device (80 mm), Agricultural vehicles -mechanical connections between towed and towing vehicles – ISO 24347:2005 JUN2014

(Dimensions) Agricultural vehicles - mechanical connections between towed and towing vehicles–part 3: tractor drawbar - AD6489-3:2004 JUL2017

Dimensions for master shield and clearance zone, Agricultural tractorsrear-mounted power take-off types 1, 2, 3 and 4–part 2: narrow-track tractors - AD500-2:2004 OCT2016

Dimensions and spline dimensions, location of PTO, Agricultural tractors-rear-mounted power take-off types 1, 2, 3 and 4–part 3: main PTO – ISO 500-3:2014 FEB2015

(Dimensions) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 2: specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments – AD5673-2:2005 SEP2014

(Dimensions) Agricultural equipment–mechanical connections between towed and towing vehicles–implement hitch rings and attachment to tractor drawbars – ISO 21244:2008 JAN2011 (R2016)

Disc and drum mowers and flail mowers, Agricultural machinery — safety — part 12: rotary - AD4254-12:2012 JUL2016

(Disc mowers) Agricultural machinery — thrown-object test and acceptance criteria — part 1: rotary mowers – ISO 17101-1:2012 JUN2016

(Disc mowers) Agricultural machinery — thrown-object test and acceptance criteria — part 1: flail mowers – ISO 17101-2:2012 JUN2016

Disk harrows, Determining cutting width and designated weight of - S290.2 DEC2004 (R2014)

Displays on agricultural equipment, Grapic symbols for operator controls and - S304.8 MAY2006 (R2015)

Displays–part 1: common symbols, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – symbols for operator, controls and other - ISO 3767-1:2016 APR2017

Displays–part 2: symbols for agricultural tractors and machinery, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - symbols for operator, controls and other - ISO 3767-2:2016 APR2017

(Disposal) Animal mortality composting – EP585 DEC2015

Distribution pattern testing of agricultural aerial application equipment, Calibration and - S386.2 FEB1988 (R2013)

(Distribution system) Safety for anhydrous ammonia application equipment – S620 MAR2017

Distribution uniformity and calibrating granular broadcast spreaders, Procedure for measuring - S341.4 DEC2009 (R2015)

(Distribution uniformity) Landscape irrigation system uniformity and application rate testing – S626 SEP2016

Diversions - EP492.1 APR2014

(Diversions) Underground outlets for conservation practices - EP425.1 MAY2016

(Doorway) Agricultural tractors — operator's workplace, access and exit — dimensions - ISO 4252:2007 MAY2012 (R2017)

(Drain installation) Design, construction, and maintenance of subsurface drains in arid and semiarid areas - EP463.2 NOV2009 (R2014)

(Drain maintenance) Design, construction, and maintenance of subsurface drains in arid and semiarid areas - EP463.2 NOV2009 (R2014)

Drain restoration after utility construction - EP511 DEC2003 (R2013)

(Drainage water management) Operation of controlled drainage systems in humid regions - EP479.1 DEC2013

Drainage outlets—open channels, Agricultural - EP407.2 SEP2014

Drainage systems, Prevention of mosquito problems associated with irrigation and - EP267.7 NOV1996 (R2017)

Drainage pumping plants, Design of agricultural - EP369.1 DEC1987 (R2014)

(Drainage) Soil and water terminology - S526.4 SEP2015

Drainage systems on agricultural lands in humid areas, Design and construction of surface - EP302.4 FEB1993 (R2017)

(Drainage) Underground outlets for conservation practices - EP425.1 MAY2016

(Drainage design) Drains in arid and semiarid areas, Design, construction, and maintenance of subsurface - EP463.2 NOV2009 (R2014)

(Drains) Design and construction of subsurface drainage systems on agricultural lands in humid areas – EP260.5 FEB2015

Drawbar, Lawn and garden ride-on (riding) tractors - ISO 9190;1990 OCT2001 (R2017)

Drawbar, Agricultural vehicles - mechanical connections between towed and towing vehicles—Part 3: tractor - AD6489-3:2004 JUL2017

(Drawbar) Field-equipment for agriculture - safety chain for towed equipment - S338.5 MAY2006 (R2016)

Drawbar pin dimensions and requirements for towed equipment – S625 MAR2015

(Drawbars) Operating requirements for tractors and power take-off driven implements - S207.13 MAY2015

Drift deposits from ground, orchard, and aerial sprayers, Procedures for measuring - S561.1 APR2004 (R2009)

Drills and seeders, Terminology for soil-engaging components for conservation-tillage planters - S477.1 AUG2013 (R2017)

Drills and seeders, Terminology and definitions for planters - S506 OCT2010 (R2014)

(Drip irrigation) Landscape irrigation sprinkler and emitter standard – ASABE/ICC 802-2014

(Drip irrigation) Landscape irrigation system uniformity and application rate testing – S626 SEP2016

Drip-tape—specifications and performance testing, Collapsible emitting hose - S553 DEC2000 (R2017)

Drive shaft specifications, Implement power take-off - S331.6 AUG2015

(Drive shaft) Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment – S604.1 SEP2014

Drive shafts-strength and wear tests and acceptance criteria, Tractors and machinery for agricultural and forestry-guards for power takeoff (PTO) – AD5674:2004 SEP2015

(Drop size) Spray nozzle classification by droplet spectra - S572.1 MAR2009 (R2017)

Droplet spectra, Spray nozzle classification by - S572.1 MAR2009 (R2017)

Drum mowers and flail mowers, Agricultural machinery — safety — part 12: rotary disc and – AD4254-12:2012 JUL2016

(Drum mowers) Agricultural machinery — thrown-object test and acceptance criteria — part 1: rotary mowers – ISO 17101-1:2012 JUN2016

(Drum mowers) Agricultural machinery — thrown-object test and acceptance criteria — part 1: flail mowers – ISO 17101-2:2012 JUN2016

Dry matter loss, Shelled corn storage time for 0.5% - D535 MAY2005 (R2014)

Drying systems, Energy efficiency of peanut - S488.1 APR2013 (R2017)

Drying farm crops, Construction and rating of equipment for - S248.3 MAR1976 (R2015ED)

Drying of agricultural crops, Thin-layer - S448.2 SEP2014 (R2018ED)

(Drying) Resistance to airflow of grains, seeds, other agricultural products, and perforated metal sheets - D272.3 MAR1996 (R2016)

Drying systems, Temperature sensor locations for seed-cotton - S530.1 AUG2007 (R2017)

(Durability) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

(Dust) Uniform terminology for air quality – S588.1 NOV2016

E

Educational and training laboratories, Safety color code for - EP415.2 NOV1997 (R2012)

(Efficiency) Agricultural machinery management data - D497.7 MAR2011 (R2015)

(Efficiency) Performing on-farm energy audits - S612 JUL2009 (R2015)

(Efficiency) Framework for evaluating the sustainability of agriculural production systems - S629 JUN2016

(Electric) Application of remote linear control devices to lawn and garden ride-on tractor attachments and implements - S377 DEC1974 (R2015)

(Electric) Equipotential plane in livestock containment areas - EP473.2 JAN2001 (R2015)

Electric fence controller, Installation of - EP568.1 MAR2017

Electric fence controller, Test procedure for measuring the output characteristics of an - S500 MAR1990 (R2014)

Electric infrared brooding equipment, Installation of - EP258.5 JUN2014

Electric power, Installation and maintenance of farm standby - EP364.4 FEB2013 (R2018)

Electrical demands for farms, Computing - EP294.3 SEP2003 (R2013)

(Electrical) Safety for electrically heated livestock waterers - EP342.3 NOV2010 (R2015)

Electrical service and equipment for irrigation - S397.4 NOV2013)

(Electrical) Single-phase rural distribution service for motors and phase converters - EP329.3 APR2013 (R2018)

(Electrical) Uniform terminology for livestock production facilities - S501 APR1990 (R2015)

(Electrical) Wiring and equipment for electrically driven or controlled irrigation machines - S362.2 JAN1983ED (R2014)

Emblem, Mounting brackets and socket for warning lamp and slow-moving vehicle (SMV) identification - S277.2 FEB1972 (R2017)

Emblem (SMV Emblem), Slow-moving vehicle identification - S276.8 APR2016

Emission factors in determining emission parameters, Cotton gins -methods of utilizing - S582 MAR2005 (R2016)

(Emitter) Collapsible emitting hose (drip tape—specifications and performance testing - S553 DEC2000 (R2017)

Emitter standard, Landscape irrigation sprinkler and – ASABE/ICC 802-2014

Enclosure environment—part 1: vocabulary, Tractors and self-propelled machines for agriculture and forestry – operator - ISO 14269-1:1997 SEP2006 (R2017)

Enclosure environment—part 2: heating, ventilation and air-conditioning test method and performance, Tractors and self-propelled machines for agriculture and forestry – operator - ISO 14269-2:1997 SEP2006 (R2017)

Enclosure environment—part 3: determination of effect of solar heating, Tractors and self-propelled machines for agriculture and forestry –operator - ISO 14269-3:1997 SEP2006 (R2017)

Enclosure environment—part 4: air filter element test method, Tractors and self-propelled machines for agriculture and forestry – operator - ISO 14269-4:1997 SEP2006 (R2017)

Enclosure environment—part 5: pressurization system test method, Tractors and self-propelled machines for agriculture and forestry-operator - ISO 14269-5:1997 SEP2006 (R20117)

(Energy) Agricultural machinery management - EP496.3 FEB2006 (R2015) Cor.1

(Energy) Agricultural machinery management data - D497.7 MAR2011 (R2015)

(Energy) Computing electrical demands for farms - EP294.3 SEP2003 (R2013)

(Energy) Construction and rating of equipment for drying farm crops - S248.3 MAR1976 (R2015ED)

(Energy) Design of ventilation systems for poultry and livestock shelters - EP270.5 DEC1986 (R2017)

Energy efficient agricultural ventilation fans, Guidelines for selection of - EP566.2 JUN2012 (R2016)

(Energy efficient) Agricultural ventilation constant speed fan test procedure - S565 OCT2005 (R2015)

Energy efficiency of peanut drying systems - S488.1 APR2013 (R2017)

(Engineering control) Tractors and self-propelled machinery for agriculture-air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013)

(Engineering control) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

(Engineering control) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

(Engineering control) Tractors and self-propelled machinery for agriculture —air quality systems for cabs—part 4: performance test of a cab, - S613-4 AUG2017

Engines with alternative fuels derived from plant oils and animal fats, Reporting of fuel properties when testing diesel - EP552.2 MAY2017

(Environment) Tractors and self-propelled machinery for agriculture-air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013)

(Environment) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

(Environment) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

(Environment) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test of a cab - S613-4 AUG2017

Environment—part 1: Vocabulary, Tractors and self-propelled machines for agriculture and forestry—operator enclosure - ISO 14269-1:1997 SEP2006 (R2017)

Environment—part 2: heating, ventilation and air-conditioning test method and performance, Tractors and self-propelled machines for agriculture and forestry – operator enclosure - ISO 14269-2:1997 SEP2006 (R2017)

Environment—part 3: determination of effect of solar heating, Tractors and self-propelled machines for agriculture and forestry—operator enclosure - ISO 14269-3:1997 SEP2006 (R2017)

Environment—part 4: air filter element test method, Tractors and self-propelled machines for agriculture and forestry—operator enclosure - ISO 14269-4:1997 SEP2006 (R2017)

Environment—part 5: pressurization system test method, Tractors and self-propelled machines for agriculture and forestry—operator enclosure - ISO 14269-5:1997 SEP2006 (R2017)

(Environment) Guidelines for measuring and reporting environmental parameters for plant experiments in growth chambers - EP411.5 DEC2012 (R2016)

(Environment) Guidelines for selection of energy efficient agricultural ventilation fans - EP566.2 JUN2012 (R2016)

(Environmental protection) Best management practices for boom spraying - S592.1 AUG2016

(Equipment) Tractors and machinery for agriculture and forestry — basic types — vocabulary- S390.6 (ISO 12934:2013) DEC2016

(Equipment) Terminology and definitions for agricultural tillage implements - S414.2 MAR2009 (R2013)

Equipment, Safety for farmstead - S354.6 NOV2016

Erosion and sediment control plans for land disturbing activities, Mapping symbols and nomenclature for - S422.1 DEC2015

(Erosion) Design and construction of surface drainage systems on agricultural lands in humid areas - EP302.4 FEB1993 (R2017)

(Erosion) Terrace systems - S268.6 MAR2017

(Erosion) Soil and water terminology - S526.4 SEP2015

(Erosion) Water and sediment control basins - S442.2 FEB2017

(Evacuation time) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

Exit — dimensions, Agricultural tractors — operator's workplace, access and - ISO 4252:2007 MAY2012 (R2017)

Experiments in growth chambers, Guidelines for measuring and reporting environmental parameters for plant - EP411.5 DEC2012 (R2016)

(Exposure) Cotton module cover material performance – S615.1 DEC2013

F

Facilities, Lighting systems for agricultural - EP344.4 JAN2014

(Falling object protection) Tractors for agriculture and forestry — falling object protective structures — test procedures and performance requirements – ISO 27850:2013 MAY2016

Fan test standard, Agricultural ventilation constant speed - S565 OCT2005 (R2015)

(Fan-ventilation) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

Fans, Guidelines for selection of energy efficient agricultural ventilation - EP566.2 JUN2012 (R2016)

Farmstead equipment, Safety for - S354.6 NOV2016

(Fasteners) T-hook slots for securement in shipment of agricultural equipment - S356.1 MAR1980 (R2015)

Feed bunks, and feeding fences, Terminology and recommendations for freestall dairy housing, freestalls - EP444.1 DEC1999 (R2016)

Feed materials by sieving, Method of determining and expressing fineness of - S319.4 FEB2008 (R2017)

Feeds, Test procedure for solids-mixing equipment for animal - S303.4 SEP2007 (R2017)

Fence controllers, Installation of electric - EP568.1 MAR2017

Fence controller, Test procedure for measuring the output characteristics of an electric - S500 MAR1990 (R2014)

(Fertilizer) Safety for anhydrous ammonia application equipment – S620 MAR2017

(Fertilizer) Spray nozzle classification by droplet spectra - S572.1 MAR2009 (R2017)

Fertilizer and pesticide hoppers and containers, Capacity designation for - S281.3 APR1987 (R2013)

Fertilizer distributors, Agricultural machinery — safety — part 6: sprayers and liquid – AD4254-6:2009 AUG2013 (R2017)

(Filters) Tractors and self-propelled machinery for agriculture-air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013

(Filters) Tractors and self-propelled machinery for agriculture—air quality systerms for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

Filters for environmental cab HVAC systems, Tractors and self-propelled machinery for agriculture—air quality systerms for cabs—part 3: - S613-3 JUN2013

(Filters) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test of a cab - S613-4 AUG2017

Filters for irrigation—testing and performance reporting, Media - S539 MAR1994 (R2017)

Flail mowers, Safety standard for large row-crop – S639.1 SEP2017

Flail mowers, Agricultural machinery — safety — part 12: rotary disc and drum mowers and – AD4254-12:2012 JUL2016

(Flail mowers) Agricultural machinery — thrown-object test and acceptance criteria — part 1: rotary mowers – ISO 17101-1:2012 JUN2016

Flail mowers, Agricultural machinery — thrown-object test and acceptance criteria — part 1– ISO 17101-2:2012 JUN2016

(Flexure) Cotton module cover material performance – S615.1 DEC2013

Flighting design considerations, Auger - EP389.2 JUN1993 (R2015)

(Flooding) Grassed waterway for runoff control - EP464.1 FEB2016

Floor and suspended loads on agricultural structures due to use - EP378.4 JUN2010 (R2014)

Flow of grain and seeds through orifices - D274.1 JAN1992 (R2017)

(Flow sensor) Yield monitor performance test standard - S578 JAN2007 (R2016)

Food materials of convex shape, Compression test of - S368.4 DEC2000 (R2017)

(Food) Method of determining peanut blanchability - S521 DEC1991 (R2016)

(FOPS) Overhead protection for agricultural tractors—test procedures and performance requirements - SAE J167 201701

(Forage) Flanged steel blower pipe dimensions - S347.1 MAR1981 (R2015)

Forage harvesters and forage harvesting, Terminology for - S472 DEC1986 (R2017)

Forage harvesters, forage transporters and forage blowers, Dimensions for compatible operation of - S328.3 JUL2003 (R2015)

Forage materials by screening, Method of determining and expressing particle size of chopped - S424.1 MAR1992 (R2017)

(Forage) Net wrap for round balers – S532 APR2014

Forage wagons, wagon boxes, and forage handling adaptations of manure spreaders, Volumetric capacity of - S238.1 APR1986 (R2015)

Forages, Friction coefficients of chopped - D251.2 APR2003 (R2017)

Forages, Moisture measurement - S358.3 MAY2012 (R2017)

(Forced-ventilation) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

(Forest engineering) Terminology for forest operations and equipment – S516 OCT2014

(Forest equipment) Terminology for forest operations and equipment – S516 OCT2014

(Forest operations) Terminology for forest operations and equipment – S516 OCT2014

Foundation design, Shallow post and pier - EP486.3 SEP2017

(Frames) Terminology and definitions for agricultural tillage implements - S414.2 MAR2009 (R2013)

(Free-link) Agricultural wheeled tractors — Rear-mounted three-point linkage — categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 – AD730:2009 W/Amd. 1:2014 MAR2015

Friction coefficients of chopped forages - D251.2 APR2003 (R2017)

(Front-end) Agricultural equipment – front loaders – dimensional and operational ratings - S301.5 SEP2012 (R2016)

Front-end loaders, Safety practices for agricultural - S355.5 SEP2015

(Front-end) Procedure for determining recommended ballast and minimum rear wheel tread settings for agricultural tractors with agricultural front loaders - EP562.1 SEP2015

Front-end loaders, Safety for agricultural - S583.1 AUG2015

(Front hitch) Agricultural wheeled tractors-front-mounted equipment—part 1: power take-off and three-point linkage - AD8759-1:1998 JAN2013

(Front hitch) Agricultural wheeled tractors-front-mounted equipment—part 2: stationary equipment connection - AD8759-2:1998 OCT2016

(Fuel) Agricultural machinery management data - D497.7 MAR2011 (R2015)

(Fuel) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

(Fuel Testing) Reporting of fuel properties when testing diesel engines with alternative fuels derived from plant oils and animal fats - EP552.2 MAY2017

G

(Gases) Manure storage safety - EP470.1 OCT2011 (R2016)

(Generators) Installation and maintenance of farm standby electric power - EP364.4 FEB2013 (R2018)

(Genetically modified) Procedure for sampling, measuring and reporting commingled crop in combine harvest of a subsequent crop - S598 JAN2010 (R2014)

(Girders) Design requirements and bending properties for mechanically laminated wood assemblies - EP559.1 W/Corr. 1 AUG2010 (R2014)

(GMO) Procedure for sampling, measuring and reporting commingled crop in combine harvest of a subsequent crop - S598 JAN2010 (R2014)

(GNSS) Tractors and machinery for agriculture and forestry — test procedures for positioning and guidance systems in agriculture — part 2: testing of satellite-based auto-guidance systems during straight and level travel – ISO12188-2:2012 OCT2015

(Grain) Procedure for sampling, measuring and reporting commingled crop in combine harvest of a subsequent crop - S598 JAN2010 (R2014)

Grain and grain products, Thermal properties of - D243.4 MAY2003 (R2017)

Grain and seed, Dielectric properties of - D293.4 JAN2012 (R2016)

Grain and seeds, Moisture measurement—unground - S352.2 APR1988 (R2017)

Grain and seeds through orifices, Flow of - D274.1 JAN1992 (R2017)

Grain bins, Procedure for establishing volumetric capacities of cylindrical - EP413.2 FEB2010 (R2014)

Grain for storage, Density, specific gravity, and mass-moisture relationships of - D241.4 OCT1992 (R2017)

Grain harvesting, Terminology for combines and - S343.4 JUN2015

Grain on bins, Loads exerted by free-flowing - EP433 DEC1988 (R2015) W/Corr.1

Grain on shallow storage structures, Loads exerted by free-flowing - EP545 MAR1995 (R2015)

Grain tank capacity and unloading device performance, Equipment for harvesting—combine harvesters—determination and designation of - AD5687:1999 JAN2014

(Grains) Moisture relationships of plant-based agricultural products - D245.6 OCT2007 (R2017)

Grains, seeds, other agricultural products, and perforated metal sheets, Resistance to airflow of - D272.3 MAR1996 (R2016)

Granular applicators, Procedure for calibrating - EP371.2 MAR2002 (R2016)

Granular broadcast spreaders, Procedure for measuring distribution uniformity and calibrating - S341.4 DEC2009 (R2015)

Grassed waterway for runoff control - EP464.1 FEB2016

(Ground sprayer) Terminology and definitions for application of crop or forestry production and protection agents - S327.4 JUL2012 (R2016)

Ground tool mountings – Chisel plows, field cultivators, row crop crop cultivators, ripper shanks and – S225.2 AUG2016

(Grounding) Specifications for lightning protection - EP381.1 JUL1988 (R2014)

Growth chambers, Guidelines for measuring and reporting environmental parameters for plant experiments - EP411.5 DEC2012 (R2016)

(Guard) Safety for agricultural field equipment - S318.18 JUN2017

(Guarding) Agricultural machinery — Safety — Part 13: large rotary mowers - AD4254-13:2012 OCT2012 (R2017)

Guarding for agricultural equipment - S493.1 JUL2003 (R2012)

(Guarding) Pallet load transfer system for vegetable harvesters, shuttle vehicles, and road trucks - S515 JAN1993 (R2017)

(Guarding) Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment - S604.1 SEP2014

(Guarding) Safety for farmstead equipment - S354.6 NOV2016

(Guarding) Safety for portable agricultural auger conveying equipment - S361.3 APR1990 (R2015)

(Guarding) Safety for tractor-mounted, boom-type post hole diggers – S619 DEC2013

(Guarding) Agricultural machinery – safety – part 11: pick-up balers – AD4254-11 JAN2012 (R2017)

(Guarding) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements – AD5673-1:2005 SEP2017

(Guarding) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Guarding) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

Guards for moving parts – guard opening without tools – ISO TS 28924:2007 SEP2015

Guards for power take-off (PTO) drive shafts-strength and wear tests and acceptance criteria, Tractors and machinery for agricultural and forestry - AD5674:2004 SEP2015

H

Hand signals for use in agriculture - S351 FEB1972 (R2017)

Handling of fruits and vegetables, Manually handled collapsible reusable plastic containers for - S600 OCT2011 (R2016)

Harrows, Determining cutting width and designated mass of disk - S290.2 DEC2004 (R2014)

Harvester baskets, Capacity ratings and unloading dimensions for cotton - S375.2 DEC1996 (R2013)

Harvesters and forage harvesting, Terminology for forage - S472 DEC1986 (R2017)

Harvesters, forage transporters and forage blowers, Dimensions for compatible operation of forage - S328.3 JUL2003 (R2015)

Harvesters, shuttle vehicles, and road trucks, Pallet load transfer system for vegetable - S515 JAN1993 (R2017)

(Harvesting) Combine capacity and performance test procedure - S396.3 JUN2016

Harvesting, Terminology for combines and grain - S343.4 JUN2015

Harvesting—combine harvesters—determination and designation of grain tank capacity and unloading device performance, Equipment for - AD5687:1999 JAN2014

(Hazard) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Hazard) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

(Hazard procedures) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test of a cab - S613-4 AUG2017

(HDPE) Design, installation and performance of underground, thermoplastic irrigation pipelines - S376.3 FEB2016

Headlamps for agricultural equipment - S608 AUG2008 (R2017)

Heaters with defined inlet and outlet conditions, Thermal performance testing of open-looped solar ambient air - S423.1 MAR2014

Hitch couplers—part 1: U-frame coupler, Agricultural wheeled tractors and implements—three-point - AD11001-1:2016 NOV2016

(Hitch) Field equipment for agriculture—safety chain for towed equipment - S338.5 MAY2006 (R2016)

(Hitch) Agricultural wheeled tractors — rear-mounted three-point linkage — categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 – AD730:2009 W/Amd. 1:2014 MAR2015

Hitch, Lawn and garden ride-on (riding) tractors-three-point - ISO 9191:1991 OCT2001 (R2017)

(Hitch pin) Drawbar Pin dimensions and requirements for towed equipment – S625 MAR2015

(Hitches) Operating requirements for tractors and power take-off driven implements - S207.13 MAY2015

(Hitches) Terminology and definitions for agricultural tillage implements - S414.2 MAR2009 (R2013)

(Hitching) Lawn and garden ride-on (riding) tractors-one-point tubular sleeve hitch - ISO 9192:1991 OCT2001 (R2017)

(Hitching) Safety for anhydrous ammonia application equipment – S620 MAR2017

(Hitching implements) Agricultural wheeled tractors — rear-mounted three-point linkage — categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 – AD730:2009 W/Amd. 1:2014 MAR2015

Hoppers and containers, Capacity designation for fertilizer and pesticide - S281.3 APR1987 (R2013)

(Horse drawn veichle) Lighting and marking of animal-drawn equipment - EP576.2 OCT2012 (R2017)

(Horticulture) Quantities and units of electromagnetic radiation for plants (photosynthetic organisms) - S640 JUL2017

Humid areas, Design and construction of surface drainage systems on agricultural lands in - EP302.4 FEB1993 (R2017)

HVAC design, Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC - S613-2.1 JUN2013

HVAC design, Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

(HVAC) Tractors and self-propelled machinery for agriculture-air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013)

(HVAC) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test of a cab - S613-4 AUG2017

(Hydraulic) Application of remote linear control devices to lawn and garden ride-on tractor attachments and implements - S377 DEC1974 (R2015)

Hydraulic pressure for implements, Agricultural tractors - AD10448:1994 NOV2014

(Hydaulic circuits) Safety for agricultural front end loaders - S583.1 AUG2015

Hydraulic couplers, Agricultural tractors and machinery-general purpose quick-action - AD5675:2008 JUN2016

Hydraulic couplers for lawn and garden tractors, Dimensions for cylindrical - S418.1 OCT2010 (R2014)

(Hydrologic processes) Guidelines for calibrating, validating, and evaluating hydrologic and water quality models – EP621 JUN2017

(Hydrology) Guidelines for calibrating, validating, and evaluating hydrologic and water quality models – EP621 JUN2017

I

(Impact) Framework for evaluating the sustainability of agriculural production systems - S629 JUN2016

(Implement) Agricultural machinery — agricultural trailers and trailed equipment — drawbar jacks – ISO 12140:2013 JUN2014

(Implement attachment) Agricultural equipment — mechanical connections between towed and towing vehicles — implement hitch rings and attachment to tractor drawbars - ISO 21244:2008 JAN2011 (R2016)

(Implement power-input connection (PIC)) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 2: specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments – AD5673-2:2005 SEP2014

Implement power take-off drive shaft specifications - S331.6 AUG2015

Implements, Operating requirements for tractors and power take-off driven - S207.13 MAY2015

Implements—three-point hitch couplers—part 1:U-frame couplers, Agricultural wheeled tractors and - AD11001-1:2016 NOV2016

Implements, Terminology and definitions for agricultural tillage - S414.2 MAR2009 (R2013)

Implements, Agricultural tractors — Hydraulic pressure for - AD10448:1994 NOV2014

(Implements) Braking system test procedures and braking performance criteria for agricultural field equipment - S365.9 NOV2011 (R2017)

(Implements) Terminology and definitions for soil tillage and soil-tool relationships - EP291.3 FEB2005 (R2013)

Infrared brooding equipment, Installation of electric - EP258.5 JUN2014

Injury classification (FAIC) code, Farm and agricultural - S575.1 MAR2002 (R2016)

Instructional seat, Agricultural tractors – ISO 23205:2014 FEB2016

(Instructions) Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – operator’s manual – content and format - AD3600:2015 MAY2016

Insulation in agricultural buildings, Guidelines for use of thermal - S401.2 FEB1993 (R2017)

(Irrigated agriculture) Design, construction, and maintenance of subsurface drains in arid and semiarid areas - EP463.2 NOV2009 (R2014)

(Irrigation) Collapsible emitting hose (drip tape)—specifications and performance testing - S553 DEC2000 (R2017)

(Irrigation) Concrete slip-form canal linings - S289.2 FEB1998 (R2013)

(Irrigation) Design and installation of microirrigation systems - EP405.1 APR1988 (R2014)

(Irrigation) Determining landscape plant water demands – S623.1 JAN2017

Irrigation, Electrical service and equipment - S397.4 NOV2013

Irrigation machines, Wiring and equipment for electrically driven or controlled - S362.2 JAN1983ED (R2014)

Irrigation pipe systems, Design and installation of nonreinforced concrete - S261.7 FEB1989 (R2015)

Irrigation pipelines, Design, installation and performance of underground, thermoplastic - S376.3 FEB2016

(Irrigation) Polyethylene pipe used for microirrigation laterals - S435.1 JAN2015

Irrigation and drainage systems, Prevention of mosquito problems associated with - EP267.7 NOV1996 (R2017)

(Irrigation) Procedure for sprinkler testing and performance reporting - S398.1 MAR1985 (R2016)

Irrigation runoff reuse systems, Surface - EP408.3 OCT2014

(Irrigation) Safety devices for chemigation - EP409.1 MAR1989 (R2013)

(Irrigation) Soil and water terminology - S526.4 SEP2015

Irrigation system design, Graphic symbols for pressurized - S491 APR1992 (R2017)

(Irrigation) Test procedure for determining the uniformity of water distribution of center pivot and lateral move irrigation machines equipped with spray or sprinkler nozzles - S436.1 JUN1996 (R2016)

Irrigation—testing and performance reporting, Media filters for - S539 MAR1994 (R2017)

Irrigation wells, Designing and constructing - EP400.3 OCT2007 (R2017)

J

Jacks, Agricultural machinery — agricultural trailers and trailed equipment — drawbar - ISO 12140:2013 JUN2014

K

(Knitted net) Net wrap for round balers – S532 APR2014

(Knot strength) Agricultural baling twine for automatic balers - S315.4 DEC2011 (R2017)

L

(Label) Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – safety signs and hazard pictorials – general principles – AD11684:1995 APR2011 (R2016ED) Cor.1

(Labeling) Capacity designation for fertilizer and pesticide hoppers and containers - S281.3 APR1987 (R2013)

(Laboratory) Safety color code for educational and training laboratories - EP415.2 NOV1997 (R2012)

Ladders, cages, walkways and stairs - S412.1 MAR1990 (R2014)

(Ladders) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Ladders) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

Lagoons for animal waste management, Design of anaerobic - EP403.4 FEB2011 (R2015)

Laminated wood assemblies, Design requirements and bending properties for mechanically - EP559.1 W/Corr. 1 AUG2010 (R2014)

(Laminating lumber) Design requirements and bending properties for mechanically laminated wood assemblies - EP559.1 W/Corr. 1 AUG2010 (R2014)

Lamp and slow-moving vehicle (SMV) identification emblem, Mounting brackets and socket for warning - S277.2 FEB1972 (R2017)

(Lamp lighting) Flashing warning lamp for agricultural equipment - SAE J974 AUG2002 (R2011)

Landscape plant water demands, Determining – S623.1 JAN2017

Landscape irrigation sprinkler and emitter standard - ASABE/ICC 802-2014

Landscape irrigation system uniformity and application rate testing – S626 SEP2016

Laterals, Polyethylene pipe used for microirrigation - S435.1 JAN2015

Lawn and garden tractors, Dimensions for cylindrical hydraulic couplers for - S418.1 OCT2010 (R2014)

Lawn and garden ride-on tractor attachments and implements, Application of remote linear control devices to - S377 DEC1974 (R2015)

Lawn and garden ride-on (riding) tractors - drawbar - ISO 9190:1990 OCT2001 (R2017)

Lawn and garden ride-on (riding) tractors - three-point hitch - ISO 9191:1991 OCT2001 (R2017)

Lawn and garden ride-on (riding) tractors - one-point tubular sleeve hitch - ISO 9192:1991 OCT2001 (R2017)

Lawn and garden ride-on tractors, 2000-rpm front and mid PTO for - S431.3 JUN2014

Lighting and marking of agricultural equipment on highways - S279.17 JUL2013 (R2017)

Lighting systems for agricultural facilities - EP344.4 JAN2014

Lighting and marking of animal-drawn equipment - EP576.2 OCT2012 (R2017)

(Lighting) Flashing warning lamp for agricultural equipment - SAE J974 AUG2002 (R2011)

(Lighting) Headlamps for agricultural equipment - S608 AUG2008 (R2017)

Lightning protection, Specifications for - EP381.1 JUL1988 (R2014)

Linings, Concrete slip-form canal - S289.2 FEB1998 (R2013)

Liquid fertilizer distributors, Agricultural machinery — safety — part 6: sprayers and – AD4254-6:2009 AUG2013 (R2017)

Livestock and poultry, Design values for emergency ventilation and care of - EP282.2 FEB1993 (R2013)

Livestock and poultry, Dimensions of - D321.2 MAR1985 (R2015)

Livestock containment areas, Equipotential plane in - EP473.2 JAN2001 (R2015)

(Livestock) Manure production and characteristics - D384.2 MAR2005 (R2014)

Livestock production facilities, Uniform terminology for - S501 APR1990 (R2015)

Livestock shelters, Design of ventilation systems for poultry and -EP270.5 DEC1986 (R2017)

Livestock manure handling equipment, Nomenclature/terminology for - S466.2 OCT2012 (R2016)

Livestock waterers, Safety for electrically heated - EP342.3 NOV2010 (R2015)

Load carrying ability of farm materials transport equipment, Test procedure and performance criteria for the under-carriage - S360.1 FEB2004 (R2014)

Loaders – dimensional and operational ratings, Agricultural equipment – front - S301.5 SEP2012 (R2016)

Loaders, Safety for agricultural front-end - S355.5 SEP2015

Loads for bunker (horizontal) silos, Design - EP538.2 OCT2008 (R2013)

Loads exerted by free-flowing grain on bins - EP433 DEC1988 (R2015) W/Corr. 1

Loads exerted by free-flowing grain on shallow storage structures - EP545 MAR1995 (R2015)

Loads exerted by Irish potatoes in shallow bulk storage structures - EP446.3 APR2008 (R2017)

Loads on agricultural structures due to use, Floor and suspended - EP378.4 JUN2010 (R2014)

(Location) Agricultural vehicles - mechanical connections between towed and towing vehicles - dimensions of ball-type coupling device (80 mm) - ISO 24347:2005 JUN2014

(Location) Agricultural vehicles - mechanical connections between towed and towing vehicles—part 3: tractor drawbar - AD6489-3:2004 JUL2017

Location of PTO, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 3: main PTO dimensions and spline dimensions – ISO 500-3:2014 FEB2015

(Logging) Terminology for forest operations and equipment – S516 OCT2014

(Lower Explosive Limit (LEL)), Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

(Lumber) Design requirement and bending properties for mechanically laminated wood assemblies - EP559.1 W/Corr.1 AUG2010 (R2014)

M

Machinery for agriculture and forestry — basic types — vocabulary, Tractors and machinery - S390.6 (ISO 12934:2013) DEC2016

Machinery management data, Agricultural - D497.7 MAR2011 (R2015)

Management, Agricultural machinery - EP496.3 FEB2006 (R2015) Cor.1

Management data, Agricultural machinery - D497.7 MAR2011 (R2015)

(Management) Performing on-farm energy audits -S612 JUL2009 (R2015)

Management of storages for bulk, fall-crop, Irish potatoes, Design and - EP475.3 JAN2018

Management, Uniform terminology for agricultural machinery - S495.1 NOV2005 (R2015)

Management, Uniform terminology for rural waste - S292.5. OCT1994 (R2013)

(Management) Framework for evaluating the sustainability of agriculural production systems - S629 JUN2016

(Manual) Manure storage safety - EP470.1 OCT2011 (R2016)

Manual – content and format, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – operator’s - AD3600:2015 MAY2016

(Manuals) Safety alert symbol for agricultural, construction and industrial equipment - SAE J284 201608

(Manuals) Safety for agricultural field equipment - S318.18 JUN2017

(Manuals) Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment - S604.1 SEP2014

(Manuals) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements – AD5673-1:2005 SEP2017

(Manure) Design of anaerobic lagoons for animal waste management - EP403.4 FEB2011 (R2015)

Manure handling equipment, Nomenclature/terminology for livestock - S466.2 OCT2012 (R2016)

Manure odors, Management of - EP379.5 APR2012 (R2016)

Manure production and characteristics - D384.2 MAR2005 (R2014)

Manure spreaders—dual rating method, Volumetric capacity of box type - S324.1 APR1986 (R2012)

Manure spreaders, Volumetric capacity of closed tank type - S326.1 JAN1989 (R2014)

Manure spreaders, Volumetric capacity of forage wagons, wagon boxes, and forage handling adaptations of - S238.1 APR1986 (R2015)

Manure storage safety - EP470.1 OCT2011 (R2016)

Manure storages - EP393.3 DEC1998 (R2013)

Manure storages to reduce entry risks, Ventilating - S607 OCT2010 (R2014)

(Manure) Uniform terminology for livestock production facilities - S501 APR1990 (R2015)

(Manure auger elevator) Safety for farmstead equipment - S354.6 NOV2016

(Manure-gases) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

(Manure-pits) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

Marking of agricultural equipment on highways, Lighting and - S279.17 JUL2013 (R2017)

Marking of animal-drawn equipment, Lighting and - EP576.2 OCT2012 (R2017)

(Mass balance) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2013)

(Mass flow delay) Yield monitor field test engineering procedure - S579.1 JUL2012 (R2016)

Master shield and clearance zone, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4 — part 1: general specifications, safety requirements, dimensions for - AD500-1:2014 FEB2015

Master shield and clearance zone, Agricultural tractors - rear-mounted power take-off types 1, 2,3 and 4 — part 2: narrow-tractors, dimensions for – AD500-2:2004 OCT2016

(Master shield) Agricultural tractors - rear-mounted power take-off types 1, 2, 2 and 4 — part 3: main PTO dimensions and spline dimensions, location of PTO – ISO 500-3:2014 FEB2015

(Master shield) Agricultural wheeled tractors – front-mounted equipment – part 1: power take-off and three-point linkage - AD8759-1:1998 JAN2013

(Material flow rate) Yield monitor performance test standard - S578 JAN2007 (R2016)

Meat and meat products, Moisture measurement - S353 MAR1972 (R2017)

Mechanical connections between towed and towing vehicles—implement hitch rings and attachment to tractor drawbars, Agricultural equipment - ISO 21244:2008 JAN2011 (R2016)

Mechanical connections between towed and towing vehicles - dimensions of ball-type coupling device (80 mm), Agricultural vehicles - ISO 24347:2005 JUN2014

Mechanical connections between towed and towing vehicles - part 3: tractor drawbar, Agricultural vehicles - AD6489-3:2004 JUL2017

(Meteorology) Measurement and reporting practices for automatic agricultural weather stations - EP505.1 APR2015

(Metric) units, Use of SI - EP285.8 FEB2014

(Metric) Framework for evaluating the sustainability of agriculural production systems - S629 JUN2016

(Metrics) Quantities and units of electromagnetic radiation for plants (photosynthetic organisms) - S640 JUL2017

Microirrigation laterals, Polyethylene pipe used for - S435.1 JAN2015

Microirrigation systems, Design and installation of - EP405.1 APR1988 (R2014)

(Microirrigation) Collapsible emitting hose (drip tape)—specifications and performance testing - S553 DEC2000 (R2017)

(Microirrigation) Landscape irrigation sprinkler and emitter standard – ASABE/ICC 208-2014

(Microspray) Landscape irrigation sprinkler and emitter standard – ASABE/ICC 208-2014

Milking installations - requirements and testing, Automatic - AD20966:2007 MAR2016

Milking machine installations—construction and performance - AD5707:2007 MAR2016

Milking machine installations—vocabulary - AD3918:2007 JAN2011 (R2016ED)

Milking machine installations - mechanical tests - AD6690:2007 JAN2011 (R2015ED)

(Milking machine) Atomatic milking installations - requirements and testing - AD20966:2007 MAR2016

(Mills) Safety for farmstead equipment - S354.6 NOV2016

(Mixers) Safety for farmstead equipment - S354.6 NOV2016

Mixers, Test procedure to measure mixing ability of portable farm batch - S380 DEC1975 (R2015)

Mixing ability of portable farm batch mixers, Test procedure to measure - S380 DEC1975 (R2015)

Mixing equipment for animal feeds, Test procedure for solids - S303.4 SEP2007 (R2017)

(Model calibration) Guidelines for calibrating, validating, and evaluating hydrologic and water quality models – EP621 JUN2017

(Model validation) Guidelines for calibrating, validating, and evaluating hydrologic and water quality models – EP621 JUN2017

(Modeling) Guidelines for calibrating, validating, and evaluating hydrologic and water quality models – EP621 JUN2017

Module builder and transporter standard, Cotton - S392.2 APR2005 (R2014)

Module cover material performance, Cotton – S615.1 DEC2013

(Moisture) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

Moisture measurement—forages - S358.3 MAY2012 (R2017)

Moisture measurement—meat and meat products - S353 MAR1972 (R2017)

Moisture measurement—peanuts - S410.2 JUL2010 (R2015)

Moisture measurement—tobacco - S487 DEC1987 (R2017)

Moisture measurement—unground grain and seeds - S352.2 APR1988 (R2017)

Moisture relationships of plant-based agricultural products - D245.6 OCT2007 (R2017)

(Moisture resistance) Cotton module cover material performance – S615.1 DEC2013

Mortality composting, Animal – EP585 DEC2015

Mosquito problems associated with irrigation and drainage systems, Prevention of - EP267.7 NOV1996 (R2017)

Motors and phase converters, Single-phase rural distribution service for - EP329.3 APR2013 (R2018)

(Motors) Construction and rating of equipment for drying farm crops - S248.3 MAR1976 (R2015ED)

(Motors) Design of agricultural drainage pumping plants - EP369.1 DEC1987 (R2014)

Mounting brackets and socket for warning lamp and slow-moving vehicle (SMV) identification emblem - S277.2 FEB1972 (R2017)

Mountings, Chisel plows, field cultivators, row crop cultivators, ripper shanks and ground tool - S225.2 AUG2016

Mower blade ductility test, Rotary - S483.2 AUG2011 (R2016)

Mowers, Safety standard for large row-crop flail – S639.1 SEP2017

Mowers, Agricultural machinery — safety — part 13: large rotary mowers – AD4254-13:2012 OCT2013 (R2017)

N

Narrow-track tractors, dimensions for master shield and clearance zone, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 2: - AD500-2:2004 OCT2016

Net wrap for round balers – S532 APR2014

(NH3) Safety for anhydrous ammonia application equipment – S620 MAR2017

(Nitrogen) Safety for anhydrous ammonia application equipment – S620 MAR2017

(Noise) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Noise) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

Nozzle classifcation by droplet spectra, Spray - S572.1 MAR2009 (R2017)

Nozzle wear rate, Procedure for measuring sprayer - S471 MAR1991 (R2012)

(Nozzle selection) Best management practices for boom spraying - S592.1 AUG2016

(Nurse tank wagons) Safety for anhydrous ammonia application equipment – S620 MAR2017

(Nurse tanks) Safety for anhydrous ammonia application equipment – S620 MAR2017

O

(Odor) Uniform terminolofgy for air quality – S588.1 NOV2016

Odors, Management of manure - EP379.5 APR2012 (R2016)

One-point tubular sleeve hitch, Lawn and garden ride-on (riding) tractors - ISO 9192:1991 OCT2001 (R2017)

(Open channel) Grassed waterway for runoff control - EP464.1 FEB2016

Operating requirements for tractors and power take-off driven implements - S207.13 MAY2015

Operator, Agricultural wheeled tractors and field machinery—measurement of whole-body vibration of the -ISO 5008:2002 W/Cor. 1 MAY2006 (R2015)

Operator enclosure environment - part 1: vocabulary, Tractors and self-propelled machines for agriculture and forestry - ISO 14269-1:1997 SEP2006 (R2017)

Operator enclosure environment - part 2: heating, ventilation and airconditioning test method and performance, Tractors and self-propelled machines for agriculture and forestry - ISO 14269-2:1997 SEP2006 (R2017)

Operator enclosure environment - part 3: determination of effect of solar heating, Tractors and self-propelled machines for agriculture and forestry - ISO 14269-3:1997 SEP2006 (R2017)

Operator enclosure environment - part 4: air filter element test method, Tractors and self-propelled machines for agriculture and forestry - ISO 14269-4:1997 SEP2006 (R2017)

Operator enclosure environment - part 5: pressurization system test method, Tractors and self-propelled machines for agriculture and forestry - ISO 14269-5:1997 SEP2006 (R2017)

(Operator protection) Tractors for agriculture and forestry — falling object protective structures — test procedures and performance requirements – ISO 27850:2013 MAY2016

Operator’s seat -laboratory measurement of transmitted vibration, Agricultural wheeled tractors - ISO 5007:2003 MAY2006 (R2016ED)

(Operator’s manual) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Operator’s manual) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

Operator's workplace, access and exit — dimensions, Agricultural tractors —- ISO 4252:2007 MAY2012 (R2017)

(Operator’s workplace) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Operator’s workplace) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

(OSHA) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

Overhead protection for agricultural tractors—test procedures and performance requirements - SAE J167 201701

P

(Package dimensions) Agricultural baling twine for automatic balers - S315.4 DEC2011 (R2017)

Pallet bins, Agricultural - S337.1 FEB1987 (R2017)

Pallet load transfer system for vegetable harvesters, shuttle vehicles, and road trucks - S515 JAN1993 (R2017)

Particle size of chopped forage materials by screening, Method of determining and expressing - S424.1 MAR1992 (R2017)

(Particle size) Method of determining and expressing fineness of feed materials by sieving - S319.4 FEB2008 (R2017)

Peanut blanchability, Method of determining - S521 DEC1991 (R2016)

Peanut drying systems, Energy efficiency of - S488.1 APR2013 (R2017)

Peanuts, Moisture measurement - S410.2 JUL2010 (R2015)

(Pellets) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

Penetrometer, Soil cone - S313.3 FEB1999ED (R2013)

Penetrometer, Procedures for using and reporting data obtained with the soil cone - EP542 FEB1999 (R2013)

Performance, Cotton module cover material – S615.1 DEC2013

(Permissible Exposure Limit (PEL)) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

Pesticide and fertilizer hoppers and containers, Capacity designations for - S281.3 APR1987 (R2013)

(Pesticide) Procedures for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2009)

(Pesticide) Terminology and definitions for application of crop or forestry production and protection agents - S327.4 JUL2012 (R2016)

Pesticides and pesticide-related products, Recycling plastic containers from - S596 FEB2006 (R2015ED)

(Pesticides) Agricultural machinery — safety — part 6: sprayers and liquid fertilizer distributors – AD4254-6:2009 AUG2013 (R2017)

Phase converters, Single-phase rural distribution service for motors and - EP329.3 APR2013 (R2018)

(Physical properties) Density, specific gravity, and mass-moisture relationships of grain for storage - D241.4 OCT1992 (R2017)

Pick-up balers,Agricultural machinery – safety – part 11 – AD4254-11 JAN2012 (R2017)

(Pin strength) Drawbar pin dimensions and requirements for towed equipment – S625 MAR2015

Pipe dimensions, Flanged steel blower - S347.1 MAR1981 (R2015)

Pipe systems, Design and installation of nonreinforced concrete irrigation - S261.7 FEB1989 (R2015)

Pipe used for microirrigation laterals, Polyethylene - S435.1 JAN2015

(Pipe) Design, installation and performance of underground, thermoplastic irrigation pipelines - S376.3 FEB2016

(Piping systems) Safety color code for educational and training laboratories - EP415.2 NOV1997 (R2012)

Plant experiments in growth chambers, Guidelines for measuring and reporting environmental parameters for - EP411.5 DEC2012 (R2016)

(Plants) Determining landscape plant water demands – S623.1 JAN2017

(Plant growth) Quantities and units of electromagnetic radiation for plants (photosynthetic organisms) - S640 JUL2017

(Plant materials) Moisture relationships of plant-based agricultural products - D245.6 OCT2007 (R2017)

Planters, drills and seeders, Terminology for soil-engaging components for conservation-tillage - S477.1 AUG2013 (R2017)

Planters, drills and seeders, Terminology and definitions for - S506 OCT2010 (R2014)

Plastic containers from pesticides and pesticide-related products, Recycling - S596 FEB2006 (R2015ED)

(Plastic) Design, installation and performance of underground, thermoplastic irrigation pipelines - S376.3 FEB2016

Plows, field cultivators, row crop cultivators, ripper shanks and ground tool mountings, Chisel - S225.2 AUG2016

(Point force) Procedure for measuring point trip force and maximum trip height of tillage shank assemblies - S591 MAY2008 (R2012)

(Point load) Procedure for measuring point trip force and maximum trip height of tillage shank assemblies - S591 MAY2008 (R2012)

(Pole building) Post frame building system nomenclature - S618 DEC2010 (R2016)

Polyethylene pipe used for microirrigation laterals – S435.1 JAN2015

(Pony cart) Lighting and marking of animal-drawn equipment - EP576.2 OCT2012 (R2017)

Post and pier, Foundation design, shallow - EP486.3 SEP2017

Post frame building system nomenclature - S618 DEC2010 (R2016)

Post hole diggers, Safety for tractor-mounted, boom-type – S619 DEC2013

Potatoes, Design and management of storages for bulk, fall-crop, Irish - EP475.3 JAN2018

Potatoes in shallow bulk storage structures, Loads exerted by Irish - EP446.3 APR2008 (R2017)

Poultry and livestock shelters, Design of ventilation systems for - EP270.5 DEC1986 (R2017)

Poultry, Design values for emergency ventilation and care of livestock and - EP282.2 FEB1993 (R2013)

Poultry, Dimensions of livestock and - D321.2 MAR1985 (R2015)

(Power) Agricultural machinery management - EP496.3 FEB2006 (R2015) Cor.1

(Power) Agricultural machinery management data - D497.7 MAR2011 (R2015)

Power take-off definitions and terminology for agricultural tractors - S205.2 DEC1978 (R2013)

(Power take-off) Dimensions for compatible operation of forage harvesters, forage transporters and forage blowers - S328.3 JUL2003 (R2015)

(Power take-off) Lawn and garden ride-on (riding) tractors – drawbar - ISO 9190:1990 OCT2001 (R2017)

Power take-off drive shaft specifications, Implement - S331.6 AUG2015

Power take-off driven implements, Operating requirements for tractors and - S207.13 MAY2015

Power take-off (PTO) drive shafts-strength and wear tests-acceptance criteria, Tractors and machinery for agricultural and forestry-guards for - AD5674:2004 SEP2015

(Power take-off) Safety for agricultural field equipment - S318.18 JUN2017

Power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment, Safety for - S604.1 SEP2014

Power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements, Agricultural tractors and machinery - AD5673-1:2005 SEP2017

(Power take-off) Agricultural vehicles - mechanical connections between towed and towing vehicles - dimensions of ball-type coupling device (80 mm) - ISO 24347:2005 JUN2014

(Power take-off) Agricultural vehicles - mechanical connections between towed and towing vehicles - part 3: tractor drawbar - AD6489-3:2004 JUL2017

Power take-off types 1, 2, 3 and 4—part 1: general specifications, safety requirements, dimensions for master shield and clearance zone, Agricultural tractors - rear-mounted - AD500-1:2014 FEB2015

Power take-off types 1, 2, 3 and 4—part 2: narrow-track tractors, dimensions for master shield and clearance zone, Agricultural tractors -rear-mounted – AD500-2:2004 OCT2016

Power take-off types 1, 2, 3 and 4—part 3: main PTO dimensions and spline dimensions, location of PTO, Agricultural tractors – rearmounted – ISO 500-3:2014 FEB2015

Power take-off and three-point linkage, Agricultural wheeled tractors - front-mounted equipment—part 1 - AD8759-1:1998 JAN2013

(Power take-off) Agricultural wheeled tractors - Front-mounted equipment—Part 2: Stationary equipment connection - AD8759-2:1998 OCT2016

(Power take-off) 2000-rpm front and mid PTO for lawn and garden rideon tractors - S431.3 JUN2014

Power take-off drive shafts and power-input connection — part 2: specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments, Agricultural tractors and machinery – AD5673-2:2005 SEP2014

(Pressure) Loads exerted by free-flowing grain on bins - EP433 DEC1988 (R2015) W/Corr. 1

(Pressure) Loads exerted by free-flowing grain on shallow storage structures - EP545 MAR1995 (R2015)

(Pressure) Loads exerted by Irish potatoes in shallow bulk storage structures - EP446.3 APR2008 (R2017)

(Procedures) Tractors and self-propelled machinery for agriculture-Air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013)

(Procedures) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

(Procedures) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

(Product density) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

(Product labels) Best management practices for boom spraying - S592.1 AUG2016

(Production agriculture) Best management practices for boom spraying - S592.1 AUG2016

Psychrometric data - D271.2 APR1979 (R2014)

(Publication) Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — operator’s manuals — content and format – AD3600:2015 MAY2016

(Pucks) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

Pumping plants, Design of agricultural drainage - EP369.1 DEC1987 (R2014)

(PVC) Design, installation and performance of underground, thermoplastic irrigation pipelines - S376.3 FEB2016

Q

(Quick disconnect) Agricultural tractors and machinery—general purpose quick-action hydraulic couplers - AD5675:2008 JUN2016

R

Radiation quantities and units - EP402 DEC1980 (R2016)

Radiation for plants (photosynthetic organisms), Quantities and units of electromagnetic - S640 JUL2017

Recycling plastic containers from pesticides and pesticide-related products - S596 FEB2006 (R2015ED)

(Reference sprayers) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2013)

(Reliability) Agricultural machinery management - EP496.3 FEB2006 (R2015) Cor.1

Reliability guidelines, Test and - EP456 DEC1986 (R2015)

Reporting solar cooker performance, Testing and - S580.1 NOV2013 (R2018)

Requirements, dimensions for master shield and clearance zone, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4 —part 1: general specifications, safety - AD500-1:2014 FEB2015

(Residue) Combine capacity and performance test procedure - S396.3 JUN2016

(Response time) Yield monitor field test engineering procedure - S579.1 JUL2012 (R2016)

Restoration after utility construction, Drain - EP511 DEC2003 (R2013)

(Returnable) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

Reusable plastic containers for handling of fruits and vegetables, Manually handled collapsible - S600 OCT2011 (R2016)

Ripper shanks and ground tool mountings, Chisel plows, field cultivators, row crop cultivators - S225.2 AUG2016

(Risk management) Framework for evaluating the sustainability of agriculural production systems - S629 JUN2016

(Robotic milking) Automatic milking installations — requirements and testing - AD20966:2007 MAR2016

Roll-over protective structures (ROPS) for compact utility tractors - S478.1 FEB2012 (R2016)

Roll-over protective structures (ROPS) — dynamic test method and acceptance conditions, Tractors for agriculture and forestry – ISO 3463:2006 SEP2017

Roll-over protective structures — static test method and acceptance conditions, Tractors for agriculture and forestry – ISO5700:2013 SEP2017

Roll-over protective structures on narrow-track wheeled tractors — part 1: front-mounted ROPS – ISO 12003-1:2008 SEP2017

Roll-over protective structures on narrow-track wheeled tractors — part 2: rear-mounted ROPS – ISO 12003-2:2008 SEP2017

Rollover protective structures (ROPS) for wheeled agricultural tractors - SAE J1194 NOV2016

Roll-over protective structures (ROPS) for wheeled agricultural tractors - SAE J2194 NOV2016

(ROPS) Safety for agricultural field equipment - S318.18 JUN2017

(ROPS) for compact utility tractors, Roll-over protective structures - S478.1 FEB2012 (R2016)

(ROPS) — dynamic test method and acceptance conditions, Tractors for agriculture and forestry - roll-over protective structures – ISO 3463:2006 SEP2017

(ROPS) Tractors for agriculture and forestry — roll-over protective structures — static test method and acceptance conditions – ISO5700:2013 SEP2017

ROPS, Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors — part 1: front-mounted – ISO 12003-1:2008 SEP2017

ROPS, Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors — part 2: rear-mounted – ISO 12003-2:2008 SEP2017

(ROPS) for wheeled agricultural tractors, Rollover protective structures - SAE J1194 NOV2016

(ROPS) for wheeled agricultural tractors, Roll-over protective structures - SAE J2194 NOV2016

(ROPS) Overhead protection for agricultural tractors—test procedures and performance requirements - SAE J167 201701

Rotary mower blade ductility test - S483.2 AUG2011 (R2016)

Rotary mowers, Agricultural machinery — safety — part 13: large rotary – AD4254-13:2012 OCT2012 (R2017)

(Round baler) Net wrap for round balers – S532 APR2014

Row crop cultivators, ripper shanks, and ground tool mountings, Chisel plows, field cultivators – S225.2 AUG2016

Row-crop flail mowers, Safety standard for large – S639.1 SEP2017

(Rounding) Use of SI (metric) units - EP285.8 FEB2014

(RPC) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

Runoff control, Grassed waterway for - EP464.1 FEB2016

Runoff reuse systems, Surface irrigation - EP408.3 OCT2014

S

(Safe-entry) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

Safety signs and hazard pictorials – general principles, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - AD11684:1995 APR2011 (R2016ED) Cor. 1

Safety for agricultural field equipment - S318.18 JUN2017

Safety — part 13: large rotary, Agricultural machinery – AD4254-13:2012 OCT2012 (R2017)

Safety alert symbol for agricultural, construction and industrial equipment - SAE J284 201608

(Safety) Braking system test procedures and braking performance criteria for agricultural field equipment - S365.9 NOV2011 (R2017)

Safety chain for towed equipment, Field equipment for agriculture – S338.5 MAY2006 (R2016)

Safety color code for educational and training laboratories - EP415.2 NOV1997 (R2012)

(Safety) Construction and rating of equipment for drying farm crops - S248.3 MAR1976 (R2015ED)

(Safety) Design and construction of subsurface drainage systems on agricultural lands in humid areas – EP260.5 FEB2015

(Safety) Cotton module builder and transporter standard - S392.2 APR2005 (R2014)

(Safety) Design and installation of microirrigation systems - EP405.1 APR1988 (R2014)

(Safety) Terrace systems - S268.6 MAR2017

(Safety) Design values for emergency ventilation and care of livestock and poultry - EP282.2 FEB1993 (R2013)

Safety devices for chemigation - EP409.1 MAR1989 (R2013)

(Safety) Electrical service and equipment for irrigation - S397.4 NOV2013

Safety for anhydrous ammonia application aquipment – S620 MAR2017

Safety for electrically heated livestock waterers - EP342.3 NOV2010 (R2015)

Safety for farmstead equipment - S354.6 NOV2016

(Safety) Floor and suspended loads on agricultural structures due to use - EP378.4 JUN2010 (R2014)

(Safety) Guarding for agricultural equipment - S493.1 JUL2003 (R2012)

(Safety) Guide for preparing field sprayer calibration procedures - EP367.2 MAR1991 (R2017)

(Safety) Hand signals for use in agriculture - S351 FEB1972 (R2017)

(Safety) Installation and maintenance of farm standby electric power - EP364.4 FEB2013 (R2018)

(Safety) Installation of electric infrared brooding equipment - EP258.5 JUN2014

(Safety) Agricultural machinery — agricultural trailers and trailed equipment — drawbar jacks – ISO 12140:2013 JUN2014

(Safety) Ladders, cages, walkways and stairs - S412.1 MAR1990 (R2014)

(Safety) Lighting and marking of agricultural equipment on highways - S279.17 JUL2013 (R2017)

(Safety) Flashing warning lamp for agricultural equipment - SAE J974 AUG2002 (R2011)

(Safety) Headlamps for agricultural equipment - S608 AUG2008 (R2017)

(Safety) Lighting and marking of animal-drawn equipment - EP576.2 OCT2012 (R2017)

Safety, Manure storage - EP470.1 OCT2011 (R2016)

Safety on enclosed mobile tanks for transporting and spreading agricultural liquids and slurry, Improving - S317 DEC1968 (R2012)

(Safety) Operating requirements for tractors and power take-off driven implements - S207.13 MAY2015

(Safety) Overhead protection for agricultural tractors—test procedures and performance requirements - SAE J167 201701

(Safety) Pallet load transfer system for vegetable harvesters, shuttle vehicles, and road trucks - S515 JAN1993 (R2017)

Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment - S604.1 SEP2014

Safety practices for agricultural front-end loaders - S355.5 SEP2015

Safety practices for agricultural front end loaders - S583.1 AUG2015

Safety for portable agricultural auger conveying equipment - S361.3 APR1990 (R2015)

Safety standard for agricultural tractors in scraper applications, General - S602.2 MAY2015

(Safety) Tractors and self-propelled machinery for agriculture-air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013)

(Safety) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

(Safety) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

(Safety) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test for a cab - S613-4 AUG2017

Safety for tractor-mounted, boom-type post hole diggers – S619 DEC2013

Safety requirements, dimensions for master shield and clearance zone, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 1: general specifications - AD500-1:2014 FEB2015

(Safety) Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 2: narrow-tract tractors, dimensions for master shield and clearance zone – AD500-2:2004 OCT2016

(Safety) Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 3: main PTO dimensions and spline dimensions, location of PTO – ISO 500-3:2014 FEB2015

Safety — part 6: sprayers and liquid fertilizer distributors, Agricultural machineryAD4254-6:2009 AUG2013 (R2017)

Safety — part 12: rotary disc and drum mowers and flail mowers, Agricultural machinery – AD4254-12:2012 JUL2016

(Safety) Agricultural machinery — thrown-object test and acceptance criteria — part 1: rotary mowers – ISO 17101-1:2012 JUN2016

(Safety) Agricultural machinery — thrown-object test and acceptance criteria — part 1: flail mowers – ISO 17101-2:2012 JUN2016

Safety Standard for large row-crop flail mowers – S639.1 SEP2017

(Safety) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements – AD5673-1:2005 SEP2017

(Safety) Agricultural wheeled tractors – front-mounted equipment – part 1: power take-off and three-point linkage - AD8759-1:1998 JAN2013

Safety — part 1: standard tractors, Tractors for agriculture and forestry - AD26322-1:2008 NOV2016ED

Safety- part 2: narrow-track and small tractors, Tractors for agriculture and forestry - AD26322-2:2010 JUN2017

(Safety) Procedure for calibrating granular applicators - EP371.2 MAR2002 (R2016)

(Safety) Recycling plastic containers from pesticides and pesticide-related products - S596 FEB2006 (R2015ED)

(Safety) Roll-over protective structures (ROPS) for compact utility tractors - S478.1 FEB2012 (R2016)

(Safety) Tractors for agriculture and forestry — roll-over protective structures (ROPS) — dynamic test method and acceptance conditions – ISO 3463:2006 SEP2017

(Safety) Tractors for agriculture and forestry — roll-over protective structures — static test method and acceptance conditions – ISO5700:2013 SEP2017

(Safety) Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors — part 1: front-mounted ROPS – ISO 12003-1:2008 SEP2017

(Safety) Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors — part 2: rear-mounted ROPS – ISO 12003-2:2008 SEP2017

(Safety) Rollover protective structures (ROPS) for wheeled agricultural tractors - SAE J1194 NOV2016

(Safety) Roll-over protective structures (ROPS) for wheeled agricultural tractors - SAE J2194 NOV2016

(Safety) Specifications for alarm systems utilized in agricultural structures - S417.1 MAR1985 (R2018)

(Safety) Specifications for lightning protection - EP381.1 JUL1988 (R2014)

(Safety) 2000-rpm front and mid PTO for lawn and garden ride-on tractors - S431.3 JUN2014

(Safety) Ventilating manure storages to reduce entry risks - S607 OCT2010 (R2014)

(Safety) Water and sediment control basins - S442.2 FEB2017

(Safety) Wiring and equipment for electrically driven or controlled irrigation machines - S362.2 JAN1983ED (R2014)

(Safety) Installation of electric fence controllers - EP568.1 MAR2017

(Safety chain) Agricultural vehicles - mechanical connections between towed and towing vehicles - Part 3: tractor drawbar - AD6489-3:2004 JUL2017

(Safety sign) Safety practices for agricultural front-end loaders - S355.5 SEP2015

(Safety sign) Manure storage safety - EP470.1 OCT2011 (R2016)

(Safety signs) Guide for preparing field sprayer calibration procedures - EP367.2 MAR1991 (R2017)

(Safety signs) Procedure for calibrating granular applicators - EP371.2 MAR2002 (R2016)

(Safety signs) Safety alert symbol for agricultural, construction and industrial equipment - SAE J284 201608

(Safety signs) Safety for agricultural field equipment - S318.18 JUN2017

(Safety signs) Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment - S604.1 SEP2014

(Safety signs) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements – AD5673-1:2005 SEP2017

(Safety signs) Safety for farmstead equipment - S354.6 NOV2016

(Safety signs) Safety for portable agricultural auger conveying equipment - S361.3 APR1990 (R2015)

(Safety signs) Wiring and equipment for electrically driven or controlled irrigation machines - S362.2 JAN1983ED (R2014)

Scraper applications, General safety standard for agricultural tractors in - S602.2 MAY2015

Seat, Agricultural tractors instructional – ISO 23205:2014 FEB2016

Seat – laboratory measurement of transmitted vibration, Agricultural wheeled tractors - operator’s - ISO 5007:2003 MAY2006 (R2016ED)

(Seat) Agricultural wheeled tractors and field machinery —measurement of whole-body vibration of the operator - ISO 5008:2002 W/Cor. 1 MAY2006 (R2015)

(Seat) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

(Seat belts) Roll-over protective structures (ROPS) for compact utility tractors - S478.1 FEB2012 (R2016)

(Seat belts) Rollover protective structures (ROPS) for wheeled agricultural tractors - SAE J1194 NOV2016

Seat belts — part 1: anchorage location requirements, Tractors and machinery for agriculture – ISO 3776-1:2006 MAY2012 (R2016)

Seat belts — part 2: anchorage strength requirements, tractors and machinery for agriculture - ISO 3776-2:2013 FEB2016

Seat belts—part 3: requirements for assemblies, Tractors and machinery for agriculture – ISO 3776-3:2009 OCT2015

Sediment control basins, Water and - S442.2 FEB2017

Sediment control plans for land disturbing activities, Mapping symbols and nomenclature for erosion and - S422.1 DEC2015

(Sediment control) Underground outlets for conservation practices - EP425.1 MAY2016

Seed, Dielectric properties of grain and - D293.4 JAN2012 (R2016)

Seeders, Terminology for soil-engaging components for conservation-tillage planters, drills and - S477.1 AUG2013 (R2017)

Seeders, Terminology and definitions for planters, drills and - S506 OCT2010 (R2014)

Seeds, Moisture measurement—unground grain and - S352.2 APR1988 (R2017)

(Seeds) Moisture relationships of plant-based agricultural products - D245.6 OCT2007 (R2017)

Seeds, other agricultural products, and perforated metal sheets, Resistance to airflow of grains - D272.3 MAR1996 (R2016)

Seeds through orifices, Flow of grain and - D274.1 JAN1992 (R2017)

(Self-propelled machinery) Tractors and machinery for agriculture — seat belts — part 1: anchorage location requirements – ISO 3776-1:2006 MAY2012 (R2016)

(Self-propelled machinery) Tractors and machinery for agriculture—seat belts—part 3: requirements for assemblies – ISO 3776-3:2009 OCT2015

Shallow post and pier foundation design - EP486.3 SEP2017

Shank assemblies, Procedure for measuring point trip force and maximum trip height of tillage - S591 MAY2008 (R2012)

Shanks and ground tool mountings, Chisel plows, field cultivators, row crop cultivators, ripper - S225.2 AUG2016

(Shanks) Terminology and definitions for agricultural tillage implements - S414.2 MAR2009 (R2013)

Shelters, Design of ventilation systems for poultry and livestock - EP270.5 DEC1986 (R2017)

(Shielding) Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for sgricultural field equipment - S604.1 SEP2014

(Shielding) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements – AD5673-1:2005 SEP2017

(Shielding) Guarding for agricultural equipment - S493.1 JUL2003 (R2012)

(Shielding) Safety for farmstead equipment - S354.6 NOV2016

(Shipping) T-hook slots for securement in shipment of agricultural equipment - S356.1 MAR1980 (R2015)

(Shop) Safety color code for educational and training laboratories - EP415.2 NOV1997 (R2012)

(Shovel) Chisel plows, field cultivators, row crop cultivators, ripper shanks and ground tool mountings - S225.2 AUG2016

(Shrubs) Determining landscape plant water demands – S623.1 JAN2017

SI (metric) units, Use of - EP285.8 FEB2014

Sieving, Method of determining and expressing fineness of feed materials by - S319.4 FEB2008 (R2017)

(Sieving) Method of determining and expressing particle size of chopped forage materials by screening - S424.1 MAR1992 (R2017)

Signals for use in agriculture, Hand - S351 FEB1972 (R2017)

Signs and hazard pictorials – general principles, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – safety - AD11684:1995 APR2011 (R2016ED) Cor.1

Silage and silo capacities, Tower silos: unit weight of - D252.1 MAR1982 (R2014)

(Silo unloaders) Safety for farmstead equipment - S354.6 NOV2016

(Silos) Ladders, cages, walkways and stairs - S412.1 MAR1990 (R2014)

(Silos) Specifications for lightning protection - EP381.1 JUL1988 (R2014)

Silos: unit weight of silage and silo capacities, Tower - D252.1 MAR1982 (R2014)

Silos, Design loads for bunker (horizontal) - EP538.2 OCT2008 (R2013)

Single-phase rural distribution service for motors and phase converters - EP329.3 APR2013 (R2018)

(SIS) Agricultural equipment: speed identification symbol - S584.3 JAN2013 (R2017)

Slow-moving vehicle identification emblem (SMV Emblem) - S276.8 APR2016

Slow-moving vehicle (SMV) identification emblem, Mounting brackets and socket for warning lamp and - S277.2 FEB1972 (R2017)

(Slow-moving vehicle) Lighting and marking of animal-drawn equipment - EP576.2 OCT2012 (R2017)

(SMV) Agricultural equipment: speed identification symbol (SIS) - S584.3 JAN2013 (R2017)

(SMV emblem), Slow-moving vehicle identification emblem - S276.8 APR2016

Socket for warning lamp and slow-moving vehicle (SMV) identification emblem, Mounting brackets and - S277.2 FEB1972 (R2017)

(Soil) Determining landscape plant water demands – S623.1 JAN2017

Soil and water terminology - S526.4 SEP2015

Soil cone penetrometer - S313.3 FEB1999ED (R2013)

Soil cone penetrometer, Procedures for using and reporting data obtained with the - EP542 FEB1999 (R2013)

(Soil moisture) Landscape irrigation system uniformity and application rate testing – S626 SEP2016

Soil tillage and soil-tool relationships, Terminology and definitions for - EP291.3 FEB2005 (R2013)

Solar ambient air heaters with defined inlet and outlet conditions, Thermal performance testing of open-looped - S423.1 MAR2014

Solar cooker performance, testing and reporting - S580.1 NOV2013 (R2018)

Solids-mixing equipment for animal feeds, Test procedure for - S303.4 SEP2007 (R2017)

(Speed) Agricultural tractors - rear mounted power take-off types 1, 2, 3 and 4 — part 1: general specifications, safety requirements, dimensions for master shield and clearance zone - AD500-1:2014 FEB2015

(Speed) Agricultural wheeled tractors – front-mounted equipment – part 1: power take-off and three-point linkage - AD8759-1:1998 JAN2013

(Speed) Slow-moving vehicle identification emblem (SMV emblem) - S276.8 APR2016

Speed identification symbol (SIS), Agricultural equipment - S584.3 JAN2013 (R2017)

Spline dimensions, location of PTO, Agricultural tractors - rear-mounted power take-off types 1, 2, 3 and 4 — part 3: main PTO dimensions and – ISO 500-3:2014 FEB2015

Spray nozzle classification by droplet spectra - S572.1 MAR2009 (R2017)

(Spray deposition) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2009)

(Spray drift) Best management practices for boom spraying - S592.1 AUG2016

(Spray drift) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2013)

(Spray sampling) Procedure for measuring drift deposits from ground, orchard, and aerial sprayers - S561.1 APR2004 (R2013)

Sprayer calibration procedures, Guide for preparing field - EP367.2 MAR1991 (R2017)

Sprayer nozzle wear rate, Procedure for measuring - S471 MAR1991 (R2012)

(Sprayer) Agricultural machinery — safety — part 6: sprayers and liquid fertilizer distributors – AD4254-6:2009 AUG2013 (R2017)

(Sprayers) Calibration and distribution pattern testing of agricultural aerial application equipment - S386.2 FEB1988 (R2013)

Sprayers, Procedure for measuring drift deposits from ground, orchard, and aerial - S561.1 APR2004 (R2009)

(Spraying) Terminology and definitions for application of crop or forestry production and protection agents - S327.4 JUL2012 (R2016)

(Spraying) Best management practices for boom spraying - S592.1 AUG2016

Spreaders—dual rating method, Volumetric capacity of box type manure - S324.1 APR1986 (R2012)

(Spreaders) Procedure for calibrating granular applicators - EP371.2 MAR2002 (R2016)

Spreaders, Procedure for measuring distribution uniformity and calibrating

granular broadcast - S341.4 DEC2009 (R2015)

Spreaders, Volumetric capacity of closed tank type manure - S326.1 JAN1989 (R2014)

Spreaders, Volumetric capacity of forage wagons, wagon boxes, and forage handling adaptations of manure - S238.1 APR1986 (R2015)

Spreading agricultural liquids and slurry, Improving safety on enclosed moble tanks for transporting and - S317 DEC1968 (R2012)

(Spreading) Terminology and definitions for application of crop or forestry production and protection agents - S327.4 JUL2012 (R2016)

Sprinkler nozzles, Test procedures for determining the uniformity of water distribution of center pivot and lateral move irrigation machines equipped with spray or - S436.1 JUN1996 (R2016)

Sprinkler testing and performance reporting, Procedure for - S398.1 MAR1985 (R2016)

Sprinkler and emitter standard, Landscape irrigation - ASABE/ICC 802-2014

(Sprinkler) Wiring and equipment for electrically driven or controlled irrigation machines - S362.2 JAN1983ED (R2014)

(Sprinklers) Determining landscape plant water demands – S623.1 JAN2017

(Stability) Safety for agricultural front end loaders - S583.1 AUG2015

Stairs, Ladders, cages, walkways and - S412.1 MAR1990 (R2014)

(Stalls) Terminology and recommendations for freestall dairy housing, freestalls, feed bunks, and feeding fences - EP444.1 DEC1999 (R2016)

Standby electric power, Installation and maintenance of farm - EP364.4 FEB2013 (R2018)

(Steady flow rate) Yield monitor performance test standard - S578 JAN2007 (R2016)

(Step Flow) Yield monitor performance test standard - S578 JAN2007 R2016)

(Steps) Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

(Steps) Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

Storage structures, Loads exerted by Irish potatoes in shallow bulk - EP446.3 APR2008 (R2017)

Storage safety, Manure - EP470.1 OCT2011 (R2016)

Storage time for 0.5% dry matter loss, Shelled corn - D535 MAY2005 (R2014)

(Storage) Recycling plastic containers from pesticides and pesticide-related products - S596 FEB2006 (R2015ED)

(Storage) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

Storages for bulk, fall-crop, Irish potatoes, Design and management of - EP475.3 JAN2018

Storages, Manure - EP393.3 DEC1998 (R2013)

(Structure) Load tests for metal-clad wood-frame diaphragms - EP558.1 FEB2014

(Structures) Diaphragm design of metal-clad, wood-frame rectangular buildings - EP484.3 DEC2017

Structures due to use, Floor and suspended loads on agricultural - EP378.4 JUN2010 (R2014)

(Structures) Equipotential plane in livestock containment areas - EP473.2 JAN2001 (R2015)

(Structures) Ladders, cages, walkways and stairs - S412.1 MAR1990 (R2014)

Structures, Loads exerted by free-flowing grain on shallow storage - EP545 MAR1995 (R2015)

(Structures) Shallow post and pier foundation design - EP486.3 SEP2017

Structures, Specifications for alarm systems utilized in agricultural - S417.1 MAR1985 (R2018)

(Structures) Specifications for lightning protection - EP381.1 JUL1988 (R2014)

(Structures) Uniform terminology for livestock production facilities - S501 APR1990 (R2015)

Subsurface drains in arid and semiarid areas, Design, construction, and maintenance of - EP463.2 NOV2009 (R2014)

Subsurface drainage systems on agricultural lands in humid areas, Design and construction of – EP260.5 FEB2015

Surface drainage systems on agricultural lands in humid areas, Design and construction of - EP302.4 FEB1993 (R2017)

(Surfactants) Recycling plastic containers from pesticides and pesticide-related products - S596 FEB2006 (R2015ED)

Sustainability of agricultural production systems, Framework for the – S629 JUN2016

(Sweeps) Chisel plows, field cultivators, row crop cultivators, ripper shanks and ground tool mountings - S225.2 AUG2016

Symbol for agricultural, construction and industrial equipment, Safety alert - SAE J284 201608

Symbol (SIS), Agricultural equipment: speed identification - S584.3 JAN2013 (R2017)

Symbols and nomenclature for erosion and sediment control plans for land disturbing activities, Mapping - S422.1 DEC2015

Symbols for operator controls and displays on agricultural equipment, Graphic - S304.8 MAY2006 (R2015)

Symbols for operator controls and other displays - part 1: common symbols, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - ISO 3767-1:2016 APR2017

Symbols for operator controls and other displays - part 2: symbols for agricultural tractors and machinery, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - ISO 3767-2:2016 APR2017

Symbols for pressurized irrigation system design, Graphic - S491 APR1992 (R2017)

T

T-hook slots for securement in shipment of agricultural equipment - S356.1 MAR1980 (R2015)

Tanks for transporting and spreading agricultural liquids and slurry, Improving safety on enclosed mobile - S317 DEC1968 (R2012)

(Technical) Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — operator’s manuals — content and format - AD3600:2015 MAY2016

Temperatures and wet-bulb depressions, Wet-bulb - D309.1 JUN1987 (R2017)

(Tensile strength) Agricultural baling twine for automatic balers - S315.4 DEC2011 (R2017)

Terminology and definitions for application of crop or forestry production and protection agents - S327.4 JUL2012 (R2016)

Terminology and definitions for agricultural tillage implements - S414.2 MAR2009 (R2013)

Terminology and definitions for soil tillage and soil-tool relationships - EP291.3 FEB2005 (R2013)

Terminology and recommendations for freestall dairy housing, freestalls, feed bunks, and feeding fences - EP444.1 DEC1999 (R2016)

(Terminology) Diaphragm design of metal-clad, wood-frame rectangular buildings - EP484.3 DEC2017

Terminology for agricultural machinery management, Uniform - S495.1 NOV2005 (R2015)

Terminology for agricultural tractors, Power take-off definitions and - S205.2 DEC1978 (R2013)

Terminology and definitions for biomass production, harvesting and collection, storage, processing, conversion and utilization - S593.1 JAN2011 (R2015)

Terminology for combines and grain harvesting - S343.4 JUN2015

Terminology for forage harvesters and forage harvesting - S472 DEC1986 (R2017)

Terminology for livestock production facilities, Uniform - S501 APR1990 (R2015)

Terminology for livestock manure handling equipment, Nomenclature - S466.2 OCT2012 (R2016)

(Terminology) Milking machines installations-vocabulary - AD3918:2007 JAN2011 (R2016ED)

Terminology for rural waste management, Uniform - S292.5 OCT1994 (R2013)

Terminology for soil-engaging components for conservation-tillage planters, drills and seeders - S477.1 AUG2013 (R2017)

Terminology for traction of agricultural traction and transport devices and vehicles, General - S296.5 W/Corr. 1 DEC2003 (R2013)

Terminology, Soil and water - S526.4 SEP2015

Terminology and overview, Tractors and self-propelled machinery for agriculture-air quality systems for cabs - S613-1 FEB2009 (R2013)

(Terminology) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

(Terminology) Tractors and self-propelled machinery for agriculture—Air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

(Terminology) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test of a cab - S613-4 AUG2017

(Terminology) Yield monitor field test engineering procedure - S579 1 JUL2012 (R2016)

Terminology and definitions for planters, drills and seeders - S506 OCT2010 (R2014)

Terminology for air quality, Uniform – S588.1 NOV2016

(Terminology), Milking machine installations - construction and performance - AD5707:2007 MAR2016

(Terminology), Milking machine installations - mechanical tests, - AD6690:2007 JAN2011 (R2015ED)

Terrace systems - S268.6 MAR2017

(Terraces) Underground outlets for conservation practices - EP425.1 MAY2016

(Test) Agricultural pallet bins - S337.1 FEB1987 (R2017)

Test and reliability guidelines - EP456 DEC1986 (R2015)

(Test) Designing and constructing irrigation wells - EP400.3 OCT2007 (R2017)

(Test) Energy efficiency of peanut drying systems - S488.1 APR2013 (R2017)

(Test) Method of determining peanut blanchability - S521 DEC1991 (R2016)

(Test) Tractors and self-propelled machinery for agriculture-air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013)

(Test) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

(Test) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

Test of a cab, Tractors and self-propelled machinery for agriculture — air quality systems for cabs — part 4: performance - S613-4 AUG2017

Test of animal bone, Shear and three-point bending - S459 MAR1992 (R2017)

Test of food materials of convex shape, Compression - S368.4 DEC2000 (R2017)

Test, Rotary mower blade ductility - S483.2 AUG2011 (R2016)

Test procedure for solids-mixing equipment for animal feeds - S303.4 SEP2007 (R2017)

(Test) Procedure for sprinkler testing and performance reporting - S398.1 MAR1985 (R2016)

(Test) Procedure for measuring distribution uniformity and calibrating granular broadcast spreaders - S341.4 DEC2009 (R2015)

Test procedures for positioning and guidance systems in agriculture — part 2: testing of satellite-based auto-guidance systems during straight and level travel, Tractors and machinery for agriculture and forestry – ISO 12188-2:2012 OCT2015

Test procedures and performance requirements, Tractors for agriculture and forestry — falling object protective structures —– ISO 27850:2013 MAY2016

Test procedure, Combine capacity and performance - S396.3 JUN2016

Test procedure and performance criteria for the under-carriage load carrying ability of farm materials transport equipment - S360.1 FEB2004 (R2014)

Test procedure for determining the uniformity of water distribution of center pivot and lateral move irrigation machines equipped with spray or sprinkler nozzles - S436.1 JUN1996 (R2016)

Test procedure for measuring the output characteristics of an electric fence controller - S500 MAR1990 (R2014)

(Test procedure) Method of determining and expressing particle size of chopped forage materials by screening - S424.1 MAR1992 (R2017)

(Test procedure) Procedure for measuring sprayer nozzle wear rate - S471 MAR1991 (R2012)

Test procedure to measure mixing ability of portable farm batch mixers - S380 DEC1975 (R2015)

(Test procedure) Roll-over protective structures (ROPS) for compact utility tractors - S478.1 FEB2012 (R2016)

(Test procedure) Tractors for agriculture and forestry — roll-over protective structures (ROPS) — dynamic test method and acceptance conditions – ISO 3463:2006 SEP2017

(Test procedure) Tractors for agriculture and forestry — roll-over protective structures — static test method and acceptance conditions – ISO5700:2013 SEP2017

(Test procedure) Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors — part 1: front-mounted ROPS – ISO 12003-1:2008 SEP2017

(Test procedure) Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors — part 2: rear-mounted ROPS – ISO 12003-2:2008 SEP2017

(Test procedure) Rollover protective structures (ROPS) for wheeled agricultural tractors - SAE J1194 NOV2016

Test procedures and braking performance criteria for agricultural field equipment, Braking system - S365.9 NOV2011 (R2017)

Test procedures and performance requirements, Overhead protection for agricultural tractors - SAE J167 201701

Testing and performance reporting, Media filters for irrigation - S539 MAR1994 (R2017)

Testing and reporting solar cooker performance - S580.1 NOV2013 (R2018)

Testing of open-looped solar ambient air heaters with defined inlet and outlet conditions, Thermal performance - S423.1 MAR2014

(Testing) Agricultural machinery — thrown-object test and acceptance criteria — part 1: rotary mowers – ISO 17101-1:2012 JUN2016

(Testing) Agricultural machinery — thrown-object test and acceptance criteria — part 1: flail mowers – ISO 17101-2:2012 JUN2016

Tests and acceptance criteria, Tractors and machinery for agricultural and forestry-guards for power take-off (PTO) drive shaftsstrength and wear - AD5674:2004 SEP2015

Tests for metal-clad wood-frame diaphragms, Load - EP558.1 FEB2014

Thermal insulation in agricultural buildings, Guidelines for use of - S401.2 FEB1993 (R2017)

Thermal properties of grain and grain products - D243.4 MAY2003 (R2017)

Three-point hitch, Lawn and garden ride-on (riding) tractors - ISO 9191:1991 OCT2001 (R2017)

Three-point hitch couplers — part 1: U-frame coupler, Agricultural wheeled tractors and implements - AD11001-1:2016 NOV2016

Three-point linkage, Agricultural wheeled tractors - front-mounted equipment — part 1: power take-off and - AD8759-1:1998 JAN2013

(Three-point hitch) Agricultural wheeled tractors — rear-mounted three-point linkage — categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 – AD730:2009 W/Amd. 1:2014 MAR2015

Tillage and soil-tool relationships, Terminology and definitions for soil - S291.3 FEB2005 (R2013)

(Tillage) Determining cutting width and designated mass of disk harrows - S290.2 DEC2004 (R2014)

Tillage implements, Terminology and definitions for agricultural - S414.2 MAR2009 (R2013)

Tillage shank assemblies, Procedure for measuring point trip force and maximum trip height of - S591 MAY2008 (R2012)

(Tillage) Terminology for soil-engaging components for conservation-tillage planters, drills and seeders - S477.1 AUG2013 (R2017)

(Tire) General terminology for traction of agricultural traction and transport devices and vehicles - S296.5 DEC2003 (R2013)

(Tires) Test procedure and performance criteria for the under-carriage load carrying ability of farm materials transport equipment - S360.1 FEB2004 (R2014)

Tobacco, Moisture measurement - S487 DEC1987 (R2017)

(Toolbars) Safety for anhydrous ammonia application equipment – S620 MAR2017

Towed equipment, Drawbar pin dimensions and requirements for – S625 MAR2015

(Towing hitch) Drawbar pin dimensions and requirements for towed equipment – S625 MAR2015

(Tracer) Test procedure for solids-mixing equipment for animal feeds - S303.4 SEP2007 (R2017)

Traction of agricultural traction and transport devices and vehicles, General terminology for - S296.5 W/Corr. 1 DEC2003 (R2013)

(Tractor) Agricultural machinery management - EP496.3 FEB2006 (R2015) Cor.1

(Tractor) Agricultural machinery management data - D497.7 MAR2011 (R2015)

(Tractor) Agricultural equipment – front loaders – dimensional and operational ratings - S301.5 SEP2012 (R2016)

Tractor attachments and implements, Application of remote linear control devices to lawn and garden ride-on - S377 DEC1974 (R2015)

(Tractor) Braking system test procedures and braking performance criteria for agricultural field equipment - S365.9 NOV2011 (R2017)

Tractor drawbar, Agricultural vehicles - mechanical connections between towed and towing vehicles - part 3: - AD6489-3:2004 JUL2017

Tractor drawbars, Agricultural equipment mechanical connections between towed and towing vehicles—implement hitch rings and attachment to - ISO 21244:2008 JAN2011 (R2016)

Tractor and implements—three-point hitch couplers—part 1: U-frame coupler, Agricultural wheeled - AD11001-1:2016 NOV2016

Tractor-mounted, boom-type post hole diggers, Safety for – S619 DEC2013

(Tractors) Agricultural vehicles - mechanical connections between towed and towing vehicles - dimensions of ball-type coupling device (80 mm) - ISO 24347:2005 JUN2014

Tractors for agriculture and forestry — safety — part 1: standard tractors - AD26322-1:2008 NOV2016ED

Tractors for agriculture and forestry– safety- part 2: narrow-track and small tractors - AD26322-2:2010 JUN2017

Tractors, Dimensions for cylindrical hydraulic couplers for lawn and garden - S418.1 OCT2010 (R2014)

Tractors-drawbar, Lawn and garden ride-on (riding) - ISO 9190:1990 OCT2001 (R2017)

Tractors and field machinery — measurement of whole-body vibration of the operator, Agricultural wheeled - ISO 5008:2002 W/Cor. 1 MAY2006 (R2015)

Tractors — Hydraulic pressure for implements, Agricultural - AD10448:1994 NOV2014

Tractors, instructional seat, Agricultural – ISO 23205:2014 FEB2016

Tractors and machinery-general purpose quick-action hydraulic couplers, Agricultural - AD5675:2008 JUN2016

Tractors and machinery for agriculture – seat belts — part 1: anchorage location requirements - ISO 3776-1:2006 MAY2012 (R2016)

Tractors and machinery for agriculture — seat belts — part 2: anchorage strength requirements - ISO 3776-2:2013 FEB2016

Tractors and machinery for agriculture—seat belts—part 3: requirements for assemblies – ISO 3776-3:2009 OCT2015

Tractors —operator's workplace, access and exit — dimensions, Agricultural - ISO 4252:2007 MAY2012 (R2017)

Tractors – operator’s seat – laboratory measurement of transmitted vibration, Agricultural wheeled - ISO 5007:2003 MAY2006 (R2016ED)

Tractors, one-point tubular sleeve hitch, Lawn and garden ride-on (riding) - ISO 9192:1991 OCT2001 (R2017)

Tractors, Power take-off definitions and terminology for agricultural - S205.2 DEC1978 (R2013)

Tractors, 2000-rpm front and mid PTO for lawn and garden ride-on - S431.3 JUN2014

Tractors – front-mounted equipment – part 1: power take-off and three-point linkage, Agricultural wheeled - AD8759-1:1998 JAN2013

Tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 1: general specifications, safety requirements , dimensions for master shield and clearance zone, Agricultural - AD500-1:2014 FEB2015

Tractors - rear-mounted power take-off types 1, 2, 3 and 4—part 3: main PTO, dimensions and spline dimensions, location of PTO, Agricultural – ISO 500-3:2014 FEB2015

Tractors, Three-point hitch, Lawn and garden ride-on (riding) - ISO 9191:1991 OCT2001 (R2017)

Tractors, Rollover protective structures (ROPS) for wheeled agricultural - SAE J1194 NOV2016

Tractors, Rollover protective structures (ROPS) for wheeled agricultural - SAE J2194 NOV2016

Tractors, Roll-over protective structures (ROPS) for compact utility - S478.1 FEB2012 (R2016)

Tractors for agriculture and forestry — roll-over protective structures (ROPS) — dynamic test method and acceptance conditions – ISO 3463:2006 SEP2017

Tractors for agriculture and forestry — roll-over protective structures — static test method and acceptance conditions – ISO5700:2013 SEP2017

Tractors — part 1: front-mounted ROPS, Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors – ISO 12003-1:2008 SEP2017

Tractors — part 2: rear-mounted ROPS, Agricultural and forestry tractors — roll-over protective structures on narrow-track wheeled tractors – ISO 12003-2:2008 SEP2017

Tractors—test procedures and performance requirements, Overhead protection for agricultural - SAE J167 201701

(Tractors) Safety practices for agricultural front-end loaders - S355.5 SEP2015

Tractors in scraper applications, General safety standard for agricultural - S602.2 MAY2015

Tractors and self-propelled machinery for agriculture–air quality systems for cabs-Terminology and overview - S613-1 FEB2009 (R2013)

Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test of a cab - S613-4 AUG2017

(Trailer) Braking system test procedures and braking performance criteria for agricultural field equipment - S365.9 NOV2011 (R2017)

(Transient flow) Yield monitor performance test standard - S578 JAN2007 (R2016)

Transport devices and vehicles, General terminology for traction of agricultural traction and - S296.5 W/Corr. 1 DEC2003 (R2013)

Transport equipment, Test procedure and performance criteria for the under-carriage load carrying ability of farm materials - S360.1 FEB2004 (R2014)

(Transport) Safety for agricultural field equipment - S318.18 JUN2017

(Transport) Safety for power take-off (PTO), PTO drive shaft, and power input connection (PIC) for agricultural field equipment - S604.1 SEP2014

(Transport) Agricultural tractors and machinery — power take-off drive shafts and power-input connection — part 1: general manufacturing and safety requirements – AD5673-1:2005 SEP2017

(Transportation) Manually handled collapsible reusable plastic containers for handling of fruits and vegetables - S600 OCT2011 (R2016)

Transporters and forage blowers, Dimensions for compatible operation of forage harvesters, forage - S328.3 JUL2003 (R2015)

(Trees) Determining landscape plant water demands – S623.1 JAN2017

(Treshold Limit Value (TLV)) Ventilating manure storages to reduce entry risks – S607 OCT2010 (R2014)

(Trickle) Design and installation of microirrigation systems - EP405.1 APR1988 (R2014)

Trip force and maximum trip height of tillage shank assemblies, Procedure for measuring point - S591 MAY2008 (R2012)

Trucks, Pallet load transfer system for vegetable harvesters, shuttle vehicles, and road - S515 JAN1993 (R2017)

(Turfgrass) Determining landscape plant water demands – S623.1 JAN2017

Twine for automatic balers - S315.4 DEC2011 (R2017)

U

Under-carriage load carrying ability of farm transport equipment, Test procedure and performance criteria for the - S360.1 FEB2004 (R2014)

Underground outlets for conservation practices - EP425.1 MAY2016

Units, Radiation quantities and - EP402 DEC1980 (R2016)

Units, Use of SI (metric) - EP285.8 FEB2014

Utility construction, Drain restoration after -EP511 DEC2003 (R2013)

V

V-belt and v-ribbed belt drives for agricultural machines - S211.7 JUL2017

(Valves) Safety devices for chemigation - EP409.1 MAR1989 (R2013)

Vegetable harvesters, shuttle vehicles, and road trucks, Pallet load transfer system for - S515 JAN1993 (R2017)

Vehicle identification emblem (SMV Emblem), Slow-moving - S276.8 APR2016

(Vehicle) Lighting and marking of agricultural equipment on highways - S279.17 JUL2013 (R2017)

Vehicles, and road trucks, Pallet load transfer system for vegetable harvesters, shuttle - S515 JAN1993 (R2017)

Ventilation and care of livestock and poultry, Design values for emergency - EP282.2 FEB1993 (R2013)

Ventilation constant speed fan test standard, Agricultural - S565 OCT2005 (R2015)

Ventilation fans, Guidelines for selection of energy efficient agricultural - EP566.2 JUN2012 (R2016)

Ventilation systems for poultry and livestock shelters, Design of - EP270.5 DEC1986 (R2017)

(Ventilation) Tractors and self-propelled machinery for agriculture-air quality systems for cabs-terminology and overview - S613-1 FEB2009 (R2013)

(Ventilation) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 2: cab & HVAC design - S613-2.1 JUN2013

(Ventilation) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 3: filters for environmental cab HVAC systems - S613-3 JUN2013

(Ventilation) Tractors and self-propelled machinery for agriculture—air quality systems for cabs—part 4: performance test of a cab - S613-4 AUG2017

Vibration, Agricultural wheeled tractors - operator’s seat – laboratory measurement of transmitted - ISO 5007:2003 MAY2006 (R2016ED)

Vibration of the operator, Agricultural wheeled tractors and field machinery — measurement of whole-body - ISO 5008:2002 W/Cor. 1 MAY2006 (R2015)

W

(Wafers) Densified products for bulk handling — definitions and method – S269.5 OCT2012 (R2016)

Wagons, wagon boxes, and forage handling adaptations of manure spreaders, Volumetric capacity of forage - S238.1 APR1986 (R2015)

Walkways and stairs, Ladders, cages - S412.1 MAR1990 (R2014)

Warning lamp for agricultural equipment, Flashing - SAE J974 AUG2002 (R2011)

(Waste) Management of manure odors - EP379.5 APR2012 (R2016)

Waste management, Design of anaerobic lagoons for animal - EP403.4 FEB2011 (R2015)

Waste management, Uniform terminology for rural - S292.5 OCT1994 (R2013)

(Waste) Manure production and characteristics - D384.2 MAR2005 (R2014)

(Waste) Manure storages - EP393.3 DEC1998 (R2013)

(Waste) Nomenclature/terminology for livestock manure handling equipment - S466.2 OCT2012 (R2016)

(Waste) Uniform terminology for livestock production facilities - S501 APR1990 (R2015)

Water demands, Determining landscape plant – S623.1 JAN2017

Water and sediment control basins - S442.2 FEB2017

(Water budget) Determining landscape plant water demands – S623.1 JAN2017

Water quality models, Guidelines for calibrating, validating, and evaluating hydrologic and – EP621 JUN2017

(Water and Sediment Control Basin) Terrace systems – S268.6 MAR2017

Waterers, Safety for electrically heated livestock - EP342.3 NOV2010 (R2015)

(Waterways) Underground outlets for conservation practices - EP425.1 MAY2016

(Waterway) Diversions - EP492.1 APR2014

Weather stations, Measurement and reporting practices for automatic agricultural - EP505. APR2015

Wells, Designing and constructing irrigation - EP400.3 OCT2007 (R2017)

Wet-bulb temperatures and wet-bulb depressions - D309.1 JUN1987 (R2017)

Wheel tread settings for agricultural tractors with agricultural front loaders, Procedure for determining recommended ballast and minimum rear - EP562.1 SEP2015

Wire for automatic balers, Baling - S229.6 DEC1976 (R2017)

Wiring and equipment for electrically driven or controlled irrigation machines - S362.2 JAN1983ED (R2014)

(Wiring) Installation and maintenance of farm standby electric power - EP364.4 FEB2013 (R2018)

(Wiring) Safety for electrically heated livestock waterers - EP342.3 NOV2010 (R2015)

Wood chips, Solid biofuels – fuel specification and classes – part 4: graded - AD17225-4 FEB2018

(Wood design) Post frame building system nomenclature - S618 DEC2010 (R2016)

(Wood design) Design requirements and bending properties for mechanically laminated wood assemblies - EP559.1 W/Corr. 1 AUG2010 (R2014)

Wood-frame rectangular buildings, Diaphragm design of metal-clad - EP484.3 DEC2017

(Wood framing) Post frame building system nomenclature - S618 DEC2010 (R2016)

(Wood structures) Post frame building system nomenclature - S618 DEC2010 (R2016)

(Wood structures) Design requirements and bending properties for mechanically laminated wood assemblies - EP559.1 W/Corr. 1 AUG2010 (R2014)

Y

Yield monitor performance test standard - S578 JAN 2007 (R2016)

Yield monitor field test engineering procedure - S579.1 JUL2012 (R2016)